Asus MES MES User Manual - Page 33

ASUS MES User's Manual, Wake-On-LAN Connector 3-pin WOL_CON, Wake On LAN, Wake-On-Ring Connector 2-

Get Asus MES PDF manuals and user guides View all Asus MES manuals
Add to My Manuals
Save this manual to your list of manuals

Page 33 highlights

3. HARDWARE SETUP 11) Wake-On-LAN Connector (3-pin WOL_CON) This connector connects to a LAN card with a Wake-On-LAN output, such as the ASUS PCI-L101 Ethernet card (see 7.1 ASUS PCI-L101 Fast Ethernet Card). The connector powers up the system when a wakeup packet or signal is received through the LAN card. IMPORTANT: This feature requires that Wake On LAN is set to Enabled (see 4.5.1 Power Up Control) and that your system has an ATX power supply with at least 720mA +5V standby power. 01 01 01 IMPORTANT: Requires an ATX power supply with at least 720mA +5 volt standby power WOL_CON Ground +5 Volt Standby PME MES R MES Wake-On-LAN Connector 12) Wake-On-Ring Connector (2-pin WOR) This connector connects to internal modem cards with a Wake-On-Ring output. The connector powers up the system when a ringup packet or signal is received through the internal modem card. NOTE: For external modems, Wake-On-Ring is detected through the COM port. IMPORTANT: This feature requires that PWR Up On Modem Act is set to Enabled (see 4.5.1 Power Up Control) and that your system has an ATX power supply with at least 720mA +5V standby power. 3. H/W SETUP Connectors 01 01 01 WOR 1 2 Ground PIXRI# MES R MES Wake-On-Ring Connector ASUS MES User's Manual 33

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
ASUS MES User’s Manual
33
3.
HARDWARE SETUP
Connectors
3.
H/W SETUP
11) Wake-On-LAN Connector (3-pin WOL_CON)
This connector connects to a LAN card with a Wake-On-LAN output, such as
the ASUS PCI-L101 Ethernet card (see
7.1 ASUS PCI-L101 Fast Ethernet Card
).
The connector powers up the system when a wakeup packet or signal is received
through the LAN card.
IMPORTANT:
This feature requires that
Wake On LAN
is set to
Enabled
(see
4.5.1 Power Up Control
)
and that your system has an ATX power supply with at
least 720mA +5V standby power.
MES Wake-On-LAN Connector
IMPORTANT:
Requires an ATX power
supply with at least 720mA +5 volt
standby power
+5 Volt Standby
PME
Ground
WOL_CON
MES
12) Wake-On-Ring Connector (2-pin WOR)
This connector connects to internal modem cards with a Wake-On-Ring output.
The connector powers up the system when a ringup packet or signal is received
through the internal modem card.
NOTE:
For external modems, Wake-On-Ring
is detected through the COM port.
IMPORTANT:
This feature requires that
PWR Up On Modem Act
is set to
Enabled
(see
4.5.1 Power Up Control
)
and that your system has an ATX power
supply with at least 720mA +5V standby power.
MES Wake-On-Ring Connector
WOR
PIXRI#
Ground
2
1
MES