Asus P E-P55T2P4D User Manual - Page 53
The Flash Memory Writer Utility Screen
View all Asus P E-P55T2P4D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
IV. BIOS SOFTWARE • Boot from a floppy disk formatted with the "FORMAT A:/S" command without creating CONFIG.SYS and AUTOEXEC.BAT files. • If you are using MS-DOS 6.x, you can bypass the AUTOEXEC.BAT and CONFIG.SYS by pressing when "Starting MS-DOS . . . " line is displayed on the screen. • For Windows 95 users, press to enter the Microsoft Windows 95 Startup Menu and then choose "Safe mode command prompt only" Once you have accomplished the above tasks, you can run the Flash Memory Writer utility. You can copy the contents of the \FLASH directory to your hard disk drive or to a backup floppy disk. When copying the files, ensure that the BIOS file is on the same directory as the utility. To run, change to the directory containing PFLASH.EXE and then at the DOS prompt, type: PFLASH The Flash Memory Writer Utility Screen: ASUSTeK PNP BIOS FLASH MEMORY WRITER V1.3 Copyright (C) 1995, ASUSTek COMPUTER Inc. Flash Type -- SST 29EE010 Current BIOS Revision: #401A0-0103 Choose one of the following: 1. Save Current BIOS To File 2. Update BIOS Main Block From File 3. Advanced Features Enter Choice: [1] Press ESC To Exit IMPORTANT: Flash Type may also be "INTEL 28F001BXT." If "unknown" is after "Flash type --," then this ROM chip is not programmable or not supported with the PnP BIOS and therefore cannot be programmed by the Flash Memory Writer. This screen provides three command options, which you can invoke by typing the corresponding number of the command and pressing key. The following describes each command: IV. BIOS (Flash Memory Writer) 48 P/E-P55T2P4D User's Manual