Asus P1-P5945G User Guide - Page 50
Connectors
View all Asus P1-P5945G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
3. Keyboard power (3-pin KBPWR) This jumper allows you to enable or disable the keyboard wake-up feature. Set this jumper to pins 2-3 (+5VSB) if you wish to wake up the computer when you press a key on the keyboard (the default is the Space Bar). This feature requires an ATX power supply that can supply at least 1A on the +5VSB lead, and a corresponding setting in the BIOS. R Keyboard Power Setting KBPWR 12 23 +5V +5VSB (Default) 4.4 Connectors 1. Serial ATA connectors The connector is for the Serial ATA signal cables for Serial ATA hard disk drives. SATA1 GND RSATA_RXN1 RSATA_RXP1 GND RSATA_TXN1 RSATA_TXP1 R GND SATA Connectors Important notes on Serial ATA: • You must install Windows® 2000 Service Pack 4 or the Windows® XP Service Pack1 before using Serial ATA hard disk drives. • When using the connectors in Standard IDE mode, connect the primary (boot) hard disk drive to the SATA1 connector. ASUS P1-P5945G/P2-P5945G 4-