Asus P2-P5945G User Manual - Page 8

Installing the foot stand 1. Insert the foot stand hooks into 2. the holes on the chassis. Pull the foot stand to the direction of the arrow until the lock snaps in place. English NOTE: To remove the foot stand, lift the lock, then slightly push the foot stand to the direction of the rear panel until it disengages from the chassis. Reinstalling the front panel cover 1. Insert the front panel cover tabs to the holes on the right side of the chassis, then swing 1 the front panel cover to the left. 2. ���I�n�s�e�r�t�t�h�e��f�ro��n�t�p�a��n�e�l cover hooks to the chassis until the front panel cover fits in place. 2 R Reinstalling the cover 1. Insert the cover to the chasis. Make sure the cover tabs fit the chasis rails. 2. Push the cover toward the front panel until it fits in place. 3. Secure the cover with two screws you removed earlier. NOTE: Refer to the pictures in the section "Removing the cover" on page 3 in reverse order. NOTE: For P2 model, if your optical drive tray fails to eject when you press the eject button, attach the provided stickers (0.5mm and 1.0mm) to the location shown at the back of the front panel cover. Make sure the sticker aligns with the optical drive eject button. Sticker  Installation manual