Asus P3-PH5X User Manual - Page 57
Serial ATA connectors 7-pin SATA1, SATA2, CPU, and chassis fan connectors 4-pin CPU_FAN, 3-pin
View all Asus P3-PH5X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
4. Serial ATA connectors (7-pin SATA1, SATA2) These connectors are for the Serial ATA signal cables for Serial ATA hard disk drives. P5B-VM R SATA1 SATA2 GND RSATA_RXN1 RSATA_RXP1 GND RSATA_TXN1 RSATA_TXP1 GND GND RSATA_RXN2 RSATA_RXP2 GND RSATA_TXN2 RSATA_TXP2 GND P5B-VM SATA Connectors • You must install Windows® 2000 Service Pack 4 or the Windows® XP Service Pack1 before using Serial ATA hard disk drives. • When using the connectors in standard IDE mode, you can connect the primary (boot) hard disk drive to any of the SATA connectors. 5. CPU, and chassis fan connectors (4-pin CPU_FAN, 3-pin CHA_FAN1) The fan connectors support cooling fans of 350 mA ~ 2000 mA (24 W max.) or a total of 1 A ~ 7 A (84 W max.) at +12V. Connect the fan cables to the fan connectors on the motherboard, ensuring that the black wire of each cable matches the ground pin of the connector. CHA_FAN1 GND +12V Rotation CPU_FAN P5B-VM GND CPU FAN PWR CPU FAN IN CPU FAN PWM R P5B-VM Fan Connectors Do not forget to connect the fan cables to the fan connectors. Insufficient air flow inside the system may damage the motherboard components. These are not jumpers! Do not place jumper caps on the fan connectors! ASUS Pundit P3-PH5X 4-