Asus P3B P3B Series User Guide for English Edition - Page 63
Using Display by AP mode, ASUS WiFi Projection, Projector.
View all Asus P3B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Using Display by AP mode Using this mode, you can establish a one-to-one connection between your input device and your LED projector. 1. Connect the Wi-Fi dongle to your LED projector to launch the Media Center. NOTE: If the Media Center does not automatically launch, press then select WiFi>Display via AP mode. 2. Enable the WiFi connection in your input device. Select ASUSP3B (default SSID) or the new SSID you configured for the P3B LED projector. NOTE: You may also refer to the steps presented onscreen. 3. Type the password on your input device as shown on the LED projector to enable the AP mode connection. 4. Open ASUS WiFi Projection on your input device. 5. Select Projector. 6. Tap the feature you would like to use. NOTE: The features are subject to change without prior notice due to sofware updates. Using Display by Client mode Using this mode, you can connect your LED projector to another WiFi hotspot to enable group access when using the LED projector. 1. Connect the Wi-Fi dongle to your LED projector to launch the Media Center. NOTE: If the Media Center does not automatically launch, press then select WiFi. LED projector E-Manual 63