Asus P4B-LX Motherboard DIY Troubleshooting Guide - Page 39
Fan Connectors, USB Header - panel connectors
View all Asus P4B-LX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
3. CPU and chassis fan connectors (3-pin CPU_FAN, CHASSIS_FAN) The fan connectors support a CPU fan and a chassis fan at +12V. Orient the fans properly to allow air flow to go across the onboard heat sinks instead of the expansion slots. The fan wiring and plug may vary depending on the fan manufacturer. Connect the fan cable to the connector matching the black wire to the ground pin. Do not forget to connect the fan cables to the fan connectors. Lack of sufficient air flow within the system may damage the motherboard components. These are not jumpers! DO NOT place jumper caps on the fan connectors! CPU_FAN GND +12V Rotation P4B-LX CHASIS_FAN GND +12V Rotation P4B-LX 12-Volt Fan Connectors Figure 2-23 Fan Connectors 4. USB header (10-1 pin USB23) If the USB ports on the rear panel are inadequate, a USB header is available for two additional USB ports. Connect a 2-port USB connector set to the USB header and mount the USB bracket to an open slot in the chassis. P4B-LX P4B-LX USB Header Figure 2-24 USB Header USB23 1 5 6 10 1: USB Power 6: USB Power 2: USBP2- 7: USBP3- 3: USBP2+ 8: USBP3+ 4: GND 9: GND 5: NC ASUS P4B-LX motherboard user guide 2-19