Asus P4B-M Motherboard DIY Troubleshooting Guide - Page 40

on LAN models only, LAN Settings, Bass Center Settings - drivers

Get Asus P4B-M PDF manuals and user guides View all Asus P4B-M manuals
Add to My Manuals
Save this manual to your list of manuals

Page 40 highlights

4. LAN setting (3-pin LAN_EN) (on LAN models only) This jumper allows you to enable or disable the onboard Local Area Network (LAN) feature. The default setting is on pins 2-3 (Enabled). P4B-M ® P4B-M On Board Lan Setting Figure 2-26 LAN Settings LAN_EN 12 23 Disabled Enabled (Default) 5. Bass Center setting (3-pin BCS1, BCS2) This jumper allows you to select the speaker output for a 6-channel audio system. No audio standard exists for the three pick-up surfaces on male audio ports, so it is necessary to switch the jumpers from the default position Center/Bass (pins 2-3) to Bass/Center (pins 1-2) to reroute signals on the internal leads of the Line-In, Line-Out, and Mic ports. Use the audio driver included in the support CD to install the multichannel audio feature. BCS P4B-M BCS1 BCS2 12 (BASS/CENTER) ® P4B-M Bass Center Setting Figure 2-27 Bass Center Settings BCS1 BCS2 23 (CENTER/BASS) (Default) 2-20 Chapter 2: Hardware information

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
2-20
Chapter 2: Hardware information
4.
LAN setting (3-pin LAN_EN)
(on LAN models only)
This jumper allows you to enable or disable the onboard Local Area
Network (LAN) feature. The default setting is on pins 2-3 (Enabled).
P4B-M
P4B-M On Board Lan Setting
Enabled
(Default)
Disabled
LAN_EN
12
2
3
Figure 2-26
LAN Settings
5.
Bass Center setting (3-pin BCS1, BCS2)
This jumper allows you to select the speaker output for a 6-channel
audio system. No audio standard exists for the three pick-up surfaces
on male audio ports, so it is necessary to switch the jumpers from the
default position Center/Bass (pins 2-3) to Bass/Center (pins 1-2) to re-
route signals on the internal leads of the Line-In, Line-Out, and Mic
ports.
Use the audio driver included in the support CD to install the multi-
channel audio feature.
Figure 2-27
Bass Center Settings
P4B-M
P4B-M Bass Center Setting
(CENTER/BASS)
(Default)
2
3
BCS1
BCS2
(BASS/CENTER)
12
BCS1
BCS2
BCS