Asus P4C800-E Deluxe P4C800-E Deluxe User's manual english version E1347 - Page 47
Connectors - hard drive
View all Asus P4C800-E Deluxe manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
4. SMB2.0 (two 3-pin SMB20) These jumpers allow you to enable or disable the SMBus 2.0 feature supported on the motherboard. By default, pins 2-3 are shorted (jumper caps on) to disable the feature. If you wish to install PCI devices that comply with SMBus 2.0 specification, move the jumper caps to pins 1-2 of both jumpers to enable the SMBus 2.0 feature. ® P4C800-E P4C800-E SMB20 Setting SMB20 12 23 Enable Disable (Default) 2.8 Connectors This section describes and illustrates the internal connectors on the motherboard. Always connect ribbon cables with the red stripe to Pin 1 on the connectors. Pin 1 is usually on the side closest to the power connector on hard drives and CD-ROM drives, but may be on the opposite side on floppy disk drives. 1. Floppy disk drive connector (34-1 pin FLOPPY) This connector supports the provided floppy drive ribbon cable. After connecting one end to the motherboard, connect the other end to the floppy drive. (Pin 5 is removed to prevent incorrect insertion when using ribbon cables with pin 5 plug). ® P4C800-E FLOPPY PIN 1 NOTE: Orient the red markings on the floppy ribbon cable to PIN 1. P4C800-E Floppy Disk Drive Connector ASUS P4C800-E Deluxe motherboard user guide 2-21