Asus P4GD1 P4GD1 English user manual E1675 - Page 122

5.5 Creating a RAID driver disk A floppy disk with the RAID driver is required when installing Windows® 2000/XP operating system on a hard disk drive that is included in a RAID set. To create a RAID driver disk: 1. Place the motherboard support CD into the CD-ROM drive. 2. When the D r i v e r s menu appears, select the RAID driver disk you want to create: • Click M a k e I T E 8 2 1 2 D r i v e r to create an ITE® 8212F RAID driver disk. Or Browse the contents of the support CD to locate the driver disk utility. • Go to \ D r i v e r s \ I T E 8 2 1 2 \ M a k e d i s k . e x e for the ITE® 8212F RAID driver disk utility Refer to section "5.2.2 Drivers menu" for details. 4. Insert a formatted high-density floppy disk to the floppy disk drive. 5. Follow succeeding screen information to complete process. 6. After creating a RAID driver disk, eject the floppy disk, then write-protect it to prevent computer virus infection. To install the RAID driver: 1. Install an operating system to the selected hard disk drive. During installation, the computer prompts you to press the F 6 key if you want to install a third-party SCSI or RAID driver. 2. Press then insert the RAID driver disk into the floppy disk drive. 3. Follow the succeeding screen instructions to complete the installation. 5-24 Chapter 5: Software support