Asus P4SE U2 P4SE/U2 User Manual - Page 18
Expansion slots, System memory - motherboard drivers
View all Asus P4SE U2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
1.7 System memory The motherboard has three Double Data Rate (DDR) DIMM sockets that supports up to 3GB non-ECC PC2100/1600 DDR. (Note: PC2700 max. to 4 banks only.) 104 Pins P4SE/U2 ® 80 Pins P4SE/U2 184-Pin DDR DIMM Sockets 1. Make sure the memory frequency and bus frequency setting in the BIOS are the same or set to [Auto] for optimum system performance. 2. A DDR DIMM is keyed with a notch so that it fits in only one direction. DO NOT force a DIMM into a socket to avoid damaging the DIMM. 3. Visit ASUS website (www.asus.com) for latest DDR333 Qualified Vendor List. 1.8 Expansion slots The P4SE/U2 motherboard has six (6) expansion slots. The following sub-sections describe the slots and the expansion cards that they support. 1.8.1 Configuring an expansion card After physically installing the expansion card, configure the card by adjusting the software settings. 1. Turn on the system and change the necessary BIOS settings, if any. 2. Assign an IRQ to the card. Refer to the tables below. 3. Install the software drivers for the expansion card. 1-8 Chapter 1: Motherboard Information