Asus P4T-E Motherboard DIY Troubleshooting Guide - Page 41

ASUS P4T-E User's Manual, Power Supply Connectors 20-pin block ATXPWR 4-pin ATX12V 6, pin block

Get Asus P4T-E PDF manuals and user guides View all Asus P4T-E manuals
Add to My Manuals
Save this manual to your list of manuals

Page 41 highlights

3. HARDWARE SETUP 20) Power Supply Connectors (20-pin block ATXPWR) (4-pin ATX12V) (6 pin block AUXPWR (optional) These connectors supply ATX 12V power. Each power supply plug inserts in one orientation only. Push down firmly and make sure the pins are aligned. IMPORTANT: Make sure that your ATX 12V power supply (minimum recommended wattage: 230 watts; 300W for a fully-configured system) can supply at least 20 amperes on the +5-volt lead and at least 720mA on the +5-volt standby lead (+5VSB). Your system may become unstable/unreliable and may experience difficulty in powering up if your power supply is inadequate. For WakeOn-LAN support, your ATX power supply (minimum recommended wattage: 230watts) must supply at least 720mA +5VSB. AUXPWR Pin 1 Key ATXPWR ATX12V P4T-E Pin 1 COM COM P4T-E ATX & +12V DC +12V DC Auxiliary Power Connectors Pin 1 +12.0VDC +5VSB PWR_OK COM +5.0VDC COM +5.0VDC COM +3.3VDC +3.3VDC +5.0VDC +5.0VDC -5.0VDC COM COM COM PS_ON# COM -12.0VDC +3.3VDC COM +3V +5V 3. H/W SETUP Connectors ASUS P4T-E User's Manual 41

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
ASUS P4T-E User’s Manual
41
3. HARDWARE SETUP
Connectors
3. H/W SETUP
P4T-E
P4T-E ATX &
Auxiliary Power Connectors
ATX12V
ATXPWR
AUXPWR
Pin 1
COM
+3V
+5V
Key
+12V DC
COM
+12V DC
COM
Pin 1
Pin 1
+3.3VDC
-12.0VDC
COM
PS_ON#
COM
COM
COM
-5.0VDC
+5.0VDC
+5.0VDC
PWR_OK
+12.0VDC
+3.3VDC
+3.3VDC
COM
+5.0VDC
COM
+5.0VDC
COM
+5VSB
20) Power Supply Connectors (20-pin block ATXPWR) (4-pin ATX12V) (6
pin block AUXPWR (optional)
These connectors supply ATX 12V power. Each power supply plug inserts in
one orientation only.
Push down firmly and make sure the pins are aligned.
IMPORTANT:
Make sure that your ATX 12V power supply (minimum recom-
mended wattage: 230 watts; 300W for a fully-configured system) can supply at
least 20 amperes on the +5-volt lead and at least 720mA on the +5-volt standby
lead (+5VSB). Your system may become unstable/unreliable and may experi-
ence difficulty in powering up if your power supply is inadequate. For Wake-
On-LAN support, your ATX power supply (minimum recommended wattage:
230watts) must supply at least 720mA +5VSB.