Asus P5B-MX WIFI-AP P5B-MX/Wifi-AP English Version Manual - Page 48
ATX power connectors 24-pin EATXPWR, 4-pin EATX12V
View all Asus P5B-MX WIFI-AP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
10. ATX power connectors (24-pin EATXPWR, 4-pin EATX12V) These connectors are for ATX power supply plugs. The power supply plugs are designed to fit these connectors in only one orientation. Find the proper orientation and push down firmly until the connectors completely fit. EATX12V EATXPWR R P5B-MX/WiFi-AP +12V DC +12V DC +3 Volts GND GND +12 Volts +12 Volts +5V Standby Power OK Ground +5 Volts Ground +5 Volts Ground +3 Volts P5B-MX/WiFi-AP ATX Power Connector +3 Volts Ground +5 Volts +5 Volts +5 Volts -5 Volts Ground Ground Ground PSON# Ground -12 Volts +3 Volts • For a fully configured system, we recommend that you use a power supply unit (PSU) that complies with ATX 12 V Specification 2.0 (or later version) and provides a minimum power of 400 W. • Do not forget to connect the 4-pin EATX12V power plug; otherwise, the system will not boot. • Use of a PSU with a higher power output is recommended when configuring a system with more power-consuming devices. The system may become unstable or may not boot up if the power is inadequate. • The ATX 12 V Specification 2.0-compliant (400W) PSU has been tested to support the motherboard power requirements. 1-36 Chapter 1: Product introduction