Asus P5B-VM DO P5B-VM DO English Manual E2869 - Page 50
Chassis intrusion connector 4-1 pin CHASSIS, Front panel audio connector 10-1 pin AAFP
View all Asus P5B-VM DO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
12. Chassis intrusion connector (4-1 pin CHASSIS) This connector is for a chassis-mounted intrusion detection sensor or switch. Connect one end of the chassis intrusion sensor or switch cable to this connector. The chassis intrusion sensor or switch sends a high-level signal to this connector when a chassis component is removed or replaced. The signal is then generated as a chassis intrusion event. By default , the pin labeled "Chassis Signal" and " Ground" are shorted with a jumper cap. Remove the jumper caps only when you intend to use the chassis intrusion detection feature. P5B-VM DO +5VSB_MB Chassis Signal GND R CHASSIS P5B-VM DO Chassis Intrusion connector (Default) 13. Front panel audio connector (10-1 pin AAFP) This connector is for a chassis-mounted front panel audio I/O module that supports either HD Audio or legacy AC`97 audio standard. Connect one end of the front panel audio I/O module cable to this connector. P5B-VM DO 1-38 R Azalia-compliant pin definition AAFP HP_HD MIC2_JD PRESENSE# AGND HP_L Jack_Sense HP_R MIC2_R MIC2_L Legacy AC 97-compliant pin definition NC NC NC AGND Line out_L NC Line out_R MIC2_R MIC2_L P5B-VM DO Front panel audio connector • We recommend that you connect a high-definition front panel audio module to this connector to avail of the motherboard's high-definition audio capability. • By default, this connector is set to [HD Audio]. If you want to connect a AC' 97 front panel audio module to this connector, set the Front Panel Support Type item in the BIOS setup to [AC97]. See section 2.4.6 Onboard Device Configuration for details. Chapter 1: Product introduction