Asus P5BV-C 4L User Guide - Page 69

PIO Mode [Auto] Selects the PIO mode. Configuration options: [Auto] [0] [1] [2] [3] [4] DMA Mode [Auto] Selects the DMA mode. Configuration options: [Auto] SMART Monitoring [Auto] Sets the Smart Monitoring, Analysis, and Reporting Technology. Configuration options: [Auto] [Disabled] [Enabled] 32Bit Data Transfer [Enabled] Enables or disables 32-bit data transfer. Configuration options: [Disabled] [Enabled] 4.3.5 IDE Configuration The items in this menu allow you to set or change the configurations for the IDE devices installed in the system. Select an item then press if you wish to configure the item. Main IDE Configuration ATA/IDE Configuration Configure SATA as BIOS SETUP UTILITY [Enhanced] [IDE] Hard Disk Write Protect [Disabled] IDE Detect Time Out (Sec) [35] ATA(PI) 80Pin Cable Detection [Host] Options Disabled Compatible Enhanced Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit v02.58 (C)Copyright 1985-2007, American Megatrends, Inc. ATA/IDE Configuration [Enhanced] Allows selection of the IDE operation mode depending on the installed Operating System (OS). Set to [Enhanced] if you are using native OS, such as Windows® 2000 / XP. Set to [Compatible] if you are using legacy OS, e.g. Windows ME / 98 / NT, MS-DOS. Configuration options: [Disabled] [Compatible] [Enhanced] The items Configure SATA as and Third, Fourth IDE Master / Slave options appear only when you set the ATA / IDE Configuration to [Enhanced]. ASUS P5BV-C Series 4-11