Asus P5E DELUXE GREEN User Manual - Page 80
AHCI Configuration
View all Asus P5E DELUXE GREEN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
If you want the Serial ATA hard disk drives to use the Advanced Host Controller Interface (AHCI), set this item to [AHCI]. Hard Disk Write Protect [Disabled] Disables or enables device write protection. This will be effective only if device is accessed through BIOS. Confiuration option: [Disabled] [Enabled] SATA Detect Time Out (Sec) [35] Selects the time out value for detecting ATA/ATAPI devices. Configuration options: [0] [5] [10] [15] [20] [25] [30] [35] 4.3.7 AHCI Configuration This menu is for AHCI configuration. It appears only when you set the Configure SATA as item under SATA Configuration to [AHCI]. AHCI Settings AHCI CD/DVD Boot Time out AHCI Port1 [Not Detected] AHCI Port2 [Not Detected] AHCI Port3 [Not Detected] AHCI Port4 [Not Detected] AHCI Port5 [Not Detected] AHCI Port6 [Not Detected] [15] Some SATA CD/DVD in AHCI mode need to wait ready longer. AHCI CD/DVD Boot Time out [15] Configuration options: [0] [5] [10] [15] [20] [25] [30] [35] AHCI Port1~6 [XXX] Displays the auto-detected SATA devices. AHCI Port1 Device :Not Detected SATA Port1 [Auto] SMART Monitoring [Enabled] Select the type of devices connected to the system. 4-14 Chapter 4: BIOS setup