Asus P5E Motherboard Installation Guide - Page 86
DRAM Command Rate [Auto], DRAM Static Read Control [Auto], Transaction Booster [Auto]
UPC - 610839156740
View all Asus P5E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
Read to Precharge Time [Auto] Configuration options: [Auto] [1 DRAM Clocks]~[15 DRAM Clocks] 4.4.6 DRAM Command Rate [Auto] Configuration options: [Auto] [1T] [2T] 4.4.7 DRAM Static Read Control [Auto] Configuration options: [Auto] [Disabled] [Enabled] 4.4.8 Transaction Booster [Auto] Configuration options: [Auto] [Disabled] [Enabled] Boost Level [0] This sub-item appears only when you set the Transaction Booster item to [Enabled]. Set this item to a higher level to get better performance. Use the and keys to adjust the value. The values range from 0 to 3. Relax Level [0] This sub-item appears only when you set the Transaction Booster item to [Disabled]. Set this item to a higher level to get better compatibility. Use the and keys to adjust the value. The values range from 0 to 3. The following seven items appear only when you set the Ai Overclock Tuner item to [Manual] and [X.M.P.] and are adjusted by typing the desired values using the numeric keypad and press the key. Use the and keys to adjust the value. To restore the default setting, type [auto] using the keyboard and press the key. VCORE Voltage [Auto] Allows you to set the CPU VCore voltage. The values range from 1.10000V to 2.40000V with a 0.00625V interval. Refer to the CPU documentation before setting the CPU Vcore voltage. Setting a high VCore voltage may damage the CPU permanently, and setting a low VCore voltage may make the system unstable. CPU PLL Voltage [Auto] Allows you to set the CPU PLL voltage. The values range from 1.50V to 2.78V with a 0.02V interval. FSB Termination Voltage [Auto] Allows you to set the front side bus termination voltage. The values range from 1.20V to 1.50V with a 0.02V interval. 4-20 Chapter 4: BIOS setup