Asus P5E64 WS EVOLUTION Motherboard Installation Guide - Page 92
DRAM Static Read Control [Auto], DRAM Dynamic Write Control [Auto], Ai Clock Twister [Auto], Ai
UPC - 610839161461
View all Asus P5E64 WS EVOLUTION manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
ALL PRE to REF Delay [Auto] Configuration options: [Auto] [ 1 DRAM Clocks]~[15 DRAM Clocks] 4.4.9 DRAM Static Read Control [Auto] Adjusting this item might enhance DRAM overclocking ability. Configuration options: [Auto] [Disabled] [Enabled] 4.4.10 DRAM Dynamic Write Control [Auto] Adjusting this item might enhance DRAM overclocking ability. Configuration options: [Auto] [Disabled] [Enabled] 4.4.11 Ai Clock Twister [Auto] Allows you to set the DRAM performance. Set this item to [Light] or [Lighter] to enhance DRAM stability, or [Strong] or [Stronger] to accelerate DRAM performance. Configuration options: [Auto] [Lighter] [Light] [Moderate] [Strong] [Stronger] 4.4.12 Ai Transaction Booster [Auto] Allows you to set the system performance. Configuration options: [Auto] [Manual] The following two sub-items appear only when you set the Ai Transaction Booster item to [Manual]. Common Performance Level [05] Set this item to a higher level for better compatibility or a lower level for better performance. Use the and keys to adjust the value. The values range from 1 to 31. Pull-In of CHA/B PH1/2/3/4/5 [Disabled] Set this item to [Enabled] to apply enhancement on DRAM Channel A and B, Phase 1 to 5. The number of phases is determined by DRAM frequency and FSB strap. Configuration options: [Disabled] [Enabled] The following seven items are adjusted by typing the desired values using the numeric keypad and press the key. You can also use the and keys to adjust the value. To restore the default setting, type [auto] using the keyboard and press the key. 4.4.13 CPU Voltage [Auto] Allows you to set the CPU VCore voltage. The values range from 0.85000V to 1.70000V with a 0.00625V interval. 4-22 Chapter 4: BIOS setup