Asus P5K PREMIUM/WIFI-AP User Manual - Page 54
Serial ATA hard disk drive connection, Configure SATA as, 3.6 SATA Configuration - windows 8
UPC - 610839153886
View all Asus P5K PREMIUM/WIFI-AP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
• You must install the Windows® XP Service Pack 1 or later before using Serial ATA hard disk drives. The Serial ATA RAID feature (RAID 0, RAID 1, RAID5 and RAID 10) is available only if you are using Windows® XP or later version. • When using the connectors in Standard IDE mode, connect the primary (boot) hard disk drive to the SATA1/2/5 connector. Refer to the table below for the recommended SATA hard disk drive connections. Serial ATA hard disk drive connection Connector SATA1/2/5/6 SATA3/4 Color Red Black Setting Master Slave Use Boot disk Data Disk Connect the right-angle side of SATA signal cable to SATA device. Or you may connect the right-angle side of SATA cable to the onboard SATA port to avoid mechanical conflict with huge graphics cards. right angle side When using hot-plug and NCQ, set the Configure SATA as in the BIOS to [AHCI]. See section 4.3.6 SATA Configuration for details. 2-28 Chapter 2: Hardware information