Asus P5LD2-C IPAT User Manual - Page 74
PCI Subsystem Settings
View all Asus P5LD2-C IPAT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Device Mode [STD Printer Mode] Allows you to set the mode of Printer Port. Configuration options: [STD Printer Mode] [SPP Mode] [EPP-1.9 and SPP Mode] [EPP-1.7 and SPP Mode] [ECP Mode] [ECP and EPP 1.9 Mode] [ECP and EPP 1.7 Mode] 4.4.8 PCI Subsystem Settings The items in this menu allow you to change the settings for PCI, PCI-X, and PCI Express. Select an item then press to display the configuration options. PCI Settings PCI Latency Timer [32 PCI Bus Clocks] PCI Express Device Settings Relaxed Ordering Extended Tag No Snoop Maximum Payload Maximum Read Request [Disabled] [Disabled] [Enabled] [Auto] [Auto] PCI Express Link Settings ASPM Support [Disabled] WARNING: Enabling ASPM may cause some PCI-E devices to fail Extended Synch [Disabled] Value to be programmed into PCI Latency Timer Register. PCI Latency Timer [32 PCI Bus Clocks] Allows you to select the value to be programmed into PCI Latency Timer Regisster. Configuration options: [32 PCI Bus Clocks] 64 PCI Bus Clocks] [96 PCI Bus Clocks] [128 PCI Bus Clocks] [160 PCI Bus Clocks] [192 PCI Bus Clocks] [224 PCI Bus Clocks] [248 PCI Bus Clocks] Relaxed Ordering [Disabled] Allows you to enable or disable PCI Express Device Relaxed Ordering. Configuration options: [Disabled] [Enabled] Extended Tag [Disabled] Allows you to enable or disable Extened Tag. When enabled, it allows Device to use 8-bit Tag field as a requester. Configuration options: [Disabled] [Enabled] No Snoop [Enabled] Allows you to enable or disable PCI Express Device No Snoop option. Configuration options: [Disabled] [Enabled] 4-18 Chapter 4: BIOS setup