Asus P5MT-C User Manual

Asus P5MT-C Manual

Get Asus P5MT-C PDF manuals and user guides View all Asus P5MT-C manuals
Add to My Manuals
Save this manual to your list of manuals

Asus P5MT-C manual content summary:

  • Asus P5MT-C | User Manual - Page 1
    P5MT-C Motherboard
  • Asus P5MT-C | User Manual - Page 2
    "). Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing. ASUS PROVIDES THIS MANUAL "AS IS" WITHOUT WARRANTY
  • Asus P5MT-C | User Manual - Page 3
    vii Safety information viii About this guide ix Typography x P5MT-C specifications summary xi Chapter 1: Product introduction 1.1 Welcome 1-1 1.2 Package contents 1-1 1.3 Special features 1-2 1.3.1 Product highlights 1-2 1.3.2 Innovative ASUS features 1-4 Chapter 2: Hardware information
  • Asus P5MT-C | User Manual - Page 4
    function power switch 3-2 Chapter 4: BIOS setup 4.1 Managing and updating your BIOS 4-1 4.1.1 Creating a bootable floppy disk 4-1 4.1.2 AFUDOS utility 4-2 4.1.3 ASUS CrashFree BIOS 2 utility 4-5 4.1.4 ASUS Update utility 4-7 4.2 BIOS setup program 4-10 4.2.1 BIOS menu screen 4-11 4.2.2 Menu
  • Asus P5MT-C | User Manual - Page 5
    CPU Configuration 4-21 4.4.5 Chipset 4-22 4.4.6 Onboard Devices Configuration 4-24 4.4.7 PCI PnP 4-25 4.5 Power Menu 4-26 4.5.1 ACPI APIC Support 5-12 5.2.9 Setting the Boot array in the BIOS Setup utility... 5-13 5.3 LSI Logic Embedded SATA RAID Setup Utility 5-14 5.3.1 Creating a RAID set
  • Asus P5MT-C | User Manual - Page 6
    6-14 6.3.3 Red Hat® Enterprise ver. 3.0 6-14 6.4 Management applications and utilites installation 6-15 6.4.1 Running the support CD 6-15 6.4.2 Drivers menu 6-15 6.4.3 Management Software menu 6-16 6.4.4 Utilities menu 4-16 6.4.5 Contact information 4-16 Appendix: Reference information
  • Asus P5MT-C | User Manual - Page 7
    . This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with manufacturerʼs instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation
  • Asus P5MT-C | User Manual - Page 8
    qualified service technician or your retailer. Operation safety • Before installing the motherboard and adding devices on it, carefully read all the manuals stable surface. • If you encounter technical problems with the product, contact a qualified service technician or your retailer. The symbol of
  • Asus P5MT-C | User Manual - Page 9
    when installing and configuring the motherboard. How this guide is organized This manual contains the following parts: • Chapter 1: Product introduction This chapter describes the features of the motherboard and the new technology it supports. • Chapter 2: Hardware information This chapter lists the
  • Asus P5MT-C | User Manual - Page 10
    of the following symbols used throughout this manual. DANGER/WARNING: Information to prevent injury to yourself when trying to complete a task. CAUTION: Information to prevent damage to the components when trying to complete a task. IMPORTANT: Instructions that you MUST follow to complete a task
  • Asus P5MT-C | User Manual - Page 11
    P5MT-C specifications summary CPU Chipset Front Side Bus Memory Expansion slots Storage Graphics Dual LAN USB Special features BIOS features LGA775 socket for Intel® Pentium®4/processor Compatible with Intel® PCG 05B/05A and 04B/04A and the latest Intel® Smithfield dual-core processor Supports SATA
  • Asus P5MT-C | User Manual - Page 12
    x Serial port (COM2) connector 1 x Chassis intrusion connector 1 x Ambient thermal sensor connector SSI power supply (with 24-pin and 8-pin 12 V plugs) ATX 12 V 2.0 compliant ATX form factor: 12 in x 9.8 in (30.5 cm x 24.9 cm) Device drivers ASUS Live Update utility ASUS Server Web-based Management
  • Asus P5MT-C | User Manual - Page 13
    This chapter describes the motherboard features and the new technologies it supports. 1Product introduction
  • Asus P5MT-C | User Manual - Page 14
    Chapter summary 1 1.1 Welcome 1-1 1.2 Package contents 1-1 1.3 Special features 1-2 ASUS P5MT-C
  • Asus P5MT-C | User Manual - Page 15
    for the following items. Motherboard ASUS P5MT-C motherboard Cables Accessories Application CDs Documentation 4 x Serial ATA signal cables 2 x Serial ATA power cables 80-conductor IDE cable 3-in-1 Floppy/Ultra ATA disk drive cable I/O shield ASUS motherboard support CD User guide If any of the
  • Asus P5MT-C | User Manual - Page 16
    CPU voltage and core frequency depending on the CPU loading and system speed or power requirement. See page 4-22 and the Appendix for details. Intel® E7230 and Intel® ICH7R chipset The Intel® E7230 USB 2.0, and SATA among others. DDR2-667 memory support The motherboard supports DDR2 memory which
  • Asus P5MT-C | User Manual - Page 17
    The motherboard supports the Serial ATA II technology through the Serial ATA interfaces controlled by the Intel® ICH7R. The SATA specification and 2-26 for details. Temperature, fan, and voltage monitoring The CPU temperature is monitored by the ASIC (integrated in the Winbond hardware ASUS P5MT-C 1-3
  • Asus P5MT-C | User Manual - Page 18
    feature allows you to restore the original BIOS data from the support CD in case when the BIOS codes and data are corrupted. This protection eliminates the need to buy a replacement ROM chip. See page 4-5 for details. ASUS Smart Fan technology The ASUS Smart Fan technology smartly adjusts the fan
  • Asus P5MT-C | User Manual - Page 19
    This chapter lists the hardware setup procedures that you have to perform when installing system components. It includes description of the jumpers and connectors on the motherboard. 2 Hardware information
  • Asus P5MT-C | User Manual - Page 20
    Chapter summary 2 2.1 Before you proceed 2-1 2.2 Motherboard overview 2-2 2.3 Central Processing Unit (CPU 2-6 2.4 System memory 2-13 2.5 Expansion slots 2-15 2.6 Jumpers 2-18 2.7 Connectors 2-23 ASUS P5MT-C
  • Asus P5MT-C | User Manual - Page 21
    the system and unplug the power cable before removing or plugging in any motherboard component. The illustration below shows the location of the onboard LED. ® P5MT-C 2 P5MT-C Onboard LED SB_PWR1 ON Standby Power OFF Powered Off
  • Asus P5MT-C | User Manual - Page 22
    Place nine (9) screws into the holes indicated by circles to secure the motherboard to the chassis. Do not overtighten the screws! Doing so can damage the motherboard. ® P5MT-C Place this side towards the rear of the chassis DDR2 DIMM_A1 (64 bit,240-pin module) DDR2 DIMM_A2 (64 bit,240-pin module
  • Asus P5MT-C | User Manual - Page 23
    COM1 REAR_FAN2 ATXPWR1 CPU_FAN2 FM_CPU2 Intel E7230 ATX12V1 ATX12V2 CPU_FAN1 FM_CPU1 LGA775 PARALLEL PORT ® P5MT-C VGA1 LAN_EN1 LAN1 Broadcom BCM5753 LAN2 XL VGA Controller VGA_EN1 PCI3 PCI4 SB_PWR1 8Mbit Flash BIOS PCI5 TRPWR1 BPSMB1 RECOVERY1 HDLED1 COM2 Super I/O RAID_SEL1
  • Asus P5MT-C | User Manual - Page 24
    Express slots Page 2-6 2-13 2-17 Jumpers 1. Clear RTC RAM (CLRTC1) 2. CPU fan pin selection (3-pin FM_CPU1, FM_CPU2) 3. USB device wake-up (3-pin (3-pin LAN_EN1; LAN_EN2) 7. RAID controller selection (3-pin RAID_SEL1) 8. Force BIOS recovery setting (3-pin RECOVERY1) Page 2-18 2-19 2-19 2-20 2-20
  • Asus P5MT-C | User Manual - Page 25
    pin HDLED1) 5. USB connectors (10-1 pin USB34, USB56, USB78) 6. Serial port connector (10-1 pin COM2) 7. Ambient thermal sensor (2-pin TRPWR1) 8. CPU and system fan connectors (3-pin CPU_FAN1/2, REAR_FAN1/2, FRNT_FAN1/2) 9. Backplane SMBus connector (6-1 pin BPSMB1) 10. SSI power connectors (24-pin
  • Asus P5MT-C | User Manual - Page 26
    transit-related. • Keep the cap after installing the motherboard. ASUS will process Return Merchandise Authorization (RMA) requests only if the 2.3.1 Installing the CPU To install a CPU: 1. Locate the CPU socket on the motherboard. 2 P5MT-C CPU Socket 775 Before installing the CPU, make sure that
  • Asus P5MT-C | User Manual - Page 27
    the socket pins, do not remove the PnP cap unless you are installing a CPU. 3. Lift the load lever in the direction of the arrow to a 135º cap B from the load plate window to remove (B). Load plate 5. Position the CPU over the socket, making sure that the gold triangle is on the bottom-left
  • Asus P5MT-C | User Manual - Page 28
    socket to prevent bending the connectors on the socket and damaging the CPU! 6. Close the load plate (A), then A push the load lever (B) until it snaps into the retention tab. B The motherboard supports Intel® Pentium® 4 LGA775 processors with the Intel® Enhanced Memory 64 Technology (EM64T
  • Asus P5MT-C | User Manual - Page 29
    4 processor, the package includes the CPU fan and heatsink assembly. • Your Intel chassis before you install the CPU fan and heatsink assembly. To install the CPU heatsink and fan: 1. Place the heatsink on top of the installed CPU such that the CPU fan cable is closest to the CPU fan connector.
  • Asus P5MT-C | User Manual - Page 30
    cable to the connector on the motherboard labeled CPU_FAN1/CPU_FAN2. CPU_FAN1 CPU_FAN1 ® P5MT-C GND FANPWR2 FANOUT4 2 CPU_FAN2 P5MT-C CPU Fan Connectors CPU_FAN2 FANOUT4 FANPWR2 GND • Do not forget to connect the CPU fan connector! Hardware monitoring errors can occur if you fail to plug this
  • Asus P5MT-C | User Manual - Page 31
    heatsink and fan To uninstall the CPU heatsink and fan: 1. Disconnect the CPU fan cable from the connector on the motherboard. 2. Rotate each fastener counterclockwise. the motherboard. A A B A B B A 4. Carefully remove the heatsink and fan assembly from the motherboard. ASUS P5MT-C 2-11
  • Asus P5MT-C | User Manual - Page 32
    after resetting. (The photo shows the groove shaded for emphasis.) Narrow end of the groove Refer to the documentation in the boxed or stand-alone CPU fan package for detailed information on CPU fan installation. 2-12 Chapter 2: Hardware information
  • Asus P5MT-C | User Manual - Page 33
    figure illustrates the location of the DDR2 DIMM sockets: ® P5MT-C 128 Pins 2 P5MT-C 240-pin DDR2 DIMM Sockets 112 Pins DIMM_A1 DIMM_A2 DIMM_B1 DIMM_B2 from the same vendor. Refer to the DDR2 Qualified Vendors List on the ASUS web site. • When installing one or two DIMMs, install the DIMM(s) to
  • Asus P5MT-C | User Manual - Page 34
    so that it fits in only one direction. DO NOT force a DIMM into a socket to avoid damaging the DIMM. • The DDR2 DIMM sockets do not support DDR DIMMs. DO NOT install DDR DIMMs to the DDR2 DIMM sockets. 2.4.4 Removing a DIMM Follow these steps to remove a DIMM. 1. Simultaneously press the retaining
  • Asus P5MT-C | User Manual - Page 35
    Secure the card to the chassis with the screw you drivers support "Share IRQ" or that the cards do not need IRQ assignments. Otherwise, conflicts will arise between the two PCI groups, making the system unstable and the card inoperable. Refer to the table on the next page for details. ASUS P5MT
  • Asus P5MT-C | User Manual - Page 36
    - Onboard USB controller 3 - - - shared - - - - Onboard EHCI Controller shared - - -- - - - Onboard IDE port - - shared - - - - - Onboard SATA port - - - shared - - - - Onboard Graphics Controller - - - shared - - - - Onboard LAN Contorller1 shared - - -- - - - Onboard LAN Contorller2
  • Asus P5MT-C | User Manual - Page 37
    2.5.4 PCI Express x8 slots This motherboard supports PCI Express x8 network cards, SCSI cards, and labeled PCIE1 slot may run only at x4 speed due to chipset limitation. 2.5.5 PCI slots The PCI slots support cards such as a LAN card, SCSI card, USB card, and other cards that comply with PCI 2.3
  • Asus P5MT-C | User Manual - Page 38
    pins 1-2. 4. Re-install the battery. 5. Plug the power cord and turn ON the computer. 6. Hold down the key during the boot process and enter BIOS setup to re-enter data. Except when clearing the RTC RAM, never remove the cap on CLRTC jumper default position. Removing the cap will cause
  • Asus P5MT-C | User Manual - Page 39
    using a 4-pin plug. ® P5MT-C 2 P5MT-C FM CPU Setting FM_CPU1 12 23 3-pin fan CPU, DRAM in slow refresh, power supply in reduced power mode). USBPW12 USBPW12 12 23 +5V (Default) +5VSB ® P5MT-C USBPW56 USBPW78 2 21 32 USBPW56 USBPW78 USBPW34 P5MT you need to install Service Pack 4 to
  • Asus P5MT-C | User Manual - Page 40
    an ATX power supply that can supply at least 1A on the +5VSB lead, and a corresponding setting in the BIOS. KBPWR1 12 23 ® P5MT-C +5V +5VSB 2 (Default) P5MT-C Keyboard Power Setting 5. VGA controller setting (3-pin VGA_EN1) These jumpers allow you to enable or disable the onboard ATI
  • Asus P5MT-C | User Manual - Page 41
    P5MT-C LAN_EN1 3 2 2 2 1 Enable (Default) Disable P5MT-C LAN_EN1 Setting ® P5MT-C LAN_EN2 12 23 2 Enable (Default) Disable P5MT Embedded SATA RAID Setup Utility (default); otherwise, place the jumper caps to pins 2-3 to use the Intel® Matrix Storage Manager. ® P5MT-C 2 P5MT-C
  • Asus P5MT-C | User Manual - Page 42
    pins 2-3. 3. Insert the floppy disk then turn on the system to update the BIOS. 4. Shut down the system. 5. Set the jumper back to pins 1-2. 6. Turn on the system. ® P5MT-C RECOVERY1 2 1 2 2 3 Normal (Default) BIOS recovery P5MT-C BIOS Recovery Setting 2-22 Chapter 2: Hardware information
  • Asus P5MT-C | User Manual - Page 43
    Linked Data activity SPEED LED Status Description OFF RED GREEN 10 Mbps connection 100 Mbps connection 1 Gbps connection ACT/LINK SPEED LED LED LAN port ASUS P5MT-C 2-23
  • Asus P5MT-C | User Manual - Page 44
    prevents incorrect insertion when you connect the IDE cable. • Use the 80-conductor IDE cable for Ultra DMA 100/66/33 IDE devices. ® P5MT-C 2-24 2 P5MT-C IDE Connector PRI_IDE1 PIN 1 NOTE: Orient the red markings (usually zigzag) on the IDE ribbon cable to PIN 1. Chapter 2: Hardware information
  • Asus P5MT-C | User Manual - Page 45
    SATA as item in the BIOS to [RAID]. See section "4.3.5 IDE Configuration" for details. ® P5MT-C 2 P5MT-C SATA ATA • You must install Windows® 2000 Service Pack 4 or Windows® 2003 before using Refer to the table below for the recommended SATA hard disk drive connections. Serial ATA hard disk
  • Asus P5MT-C | User Manual - Page 46
    to the SCSI connectors or the SATA connectors cause this LED to light up. HDLED1 1 2 P5MT-C SCSI/SATA Card Activity LED Connector 5. USB connectors of the system chassis. This USB connector complies with USB 2.0 specification that supports up to 480 Mbps connection speed. ® P5MT-C USB+5V
  • Asus P5MT-C | User Manual - Page 47
    to this connector, then install the module to a slot opening at the back of the system chassis. The serial port module is purchased separately. ® P5MT-C COM2 2 PIN 1 P5MT-C Serial Port2 (COM2) Connector 7. Ambient thermal sensor (2-pin TRPWR1) If you want additional thermal monitoring, connect
  • Asus P5MT-C | User Manual - Page 48
    8. CPU and system fan connectors (3-pin CPU_FAN1/2, REAR_FAN1/2, FRNT_FAN1/2) The fan connectors support cooling fans of 350 mA ~ 740 mA (8.88 W max.) or a on the fan connectors! ® P5MT-C CPU_FAN1 CPU_FAN2 REAR_FAN1 REAR_FAN2 2 FRNT_FAN1 FRNT_FAN2 P5MT-C Fan Connectors CPU_FAN1 CPU_FAN2 GND
  • Asus P5MT-C | User Manual - Page 49
    24-pin Power Connector ATX12V2 +3 Volts +3 Volts Ground +5 Volts Ground +5 Volts Ground Power OK +5V Standby +12 Volts +12 Volts +3 Volts GND GND GND GND ® P5MT-C 2 +3 Volts -12 Volts Ground PSON# Ground Ground Ground -5 Volts +5 Volts +5 Volts +5 Volts Ground +12V DC +12V DC +12V DC +12V DC
  • Asus P5MT-C | User Manual - Page 50
    supports several chassis-mounted functions. • System power LED (Green 3-pin PLED) This 3-pin connector is for the system power LED. Connect the chassis mode depending on the BIOS settings. Pressing the P5MT-C System Panel Connector The system panel connector is color-coded for easy connection. ® P5MT
  • Asus P5MT-C | User Manual - Page 51
    This chapter describes the power up Powerin3g up sequence, the vocal POST messages, and ways of shutting down the system.
  • Asus P5MT-C | User Manual - Page 52
    Chapter summary 3 3.1 Starting up for the first time 3-1 3.2 Powering off the computer 3-2 ASUS P5MT-C
  • Asus P5MT-C | User Manual - Page 53
    all switches are off. 3. Connect the power cord to the power connector at the back of the system chassis. 4. Connect the power cord to a power outlet that is equipped with a surge protector. 5. Turn down the key to enter the BIOS Setup. Follow the instructions in Chapter 4. ASUS P5MT-C 3-1
  • Asus P5MT-C | User Manual - Page 54
    is ON, pressing the power switch for less than four seconds puts the system to sleep mode or to soft-off mode, depending on the BIOS setting. Pressing the power switch for more than four seconds lets the system enter the soft-off mode regardless of the
  • Asus P5MT-C | User Manual - Page 55
    This chapter tells how to change the system settings through the BIOS Setup menus. Detailed descriptions of the BIOS parameters are also provided. 4 BIOS setup
  • Asus P5MT-C | User Manual - Page 56
    Chapter summary 4 4.1 Managing and updating your BIOS 4-1 4.2 BIOS setup program 4-10 4.3 Main menu 4-13 4.4 Advanced menu 4-18 4.5 Power menu 4-26 4.6 Boot menu 4-30 4.7 Exit menu 4-34 ASUS P5MT-C
  • Asus P5MT-C | User Manual - Page 57
    drive. c. Click Start, then select Run. d. In the Open field, type D:\bootdisk\makeboot a: assuming that D is your optical drive letter. e. Press , then follow screen instructions to continue. 2. Copy the original or the latest motherboard BIOS file to the bootable floppy disk. ASUS P5MT-C 4-1
  • Asus P5MT-C | User Manual - Page 58
    BIOS screens are for reference only. The actual BIOS screen displays may not be same as shown. 1. Copy the AFUDOS utility (afudos.exe) from the motherboard support copies the current BIOS file to the floppy disk. A:\>afudos /oOLDBIOS1.rom AMI Firmware Update Utility - Version 1.19(ASUS V2.07(03.
  • Asus P5MT-C | User Manual - Page 59
    ASUS website (www.asus.com) and download the latest BIOS file for the motherboard. Save the BIOS file to a bootable floppy disk. Write the BIOS filename on a piece of paper. You need to type the exact BIOS filename at the DOS prompt. 2. Copy the AFUDOS utility (afudos.exe) from the motherboard support
  • Asus P5MT-C | User Manual - Page 60
    . A:\>afudos /iP5MT-C.ROM /pbnc AMI Firmware Update Utility - Version 1.19(ASUS V2.07(03.11.24BB)) Copyright (C) 2002 American Megatrends, Inc. All rights reserved. WARNING!! Do not turn off power during flash BIOS Reading file ....... done Reading flash ...... done Advance Check ...... Erasing flash
  • Asus P5MT-C | User Manual - Page 61
    ASUS CrashFree BIOS 2 utility The ASUS CrashFree BIOS 2 is an auto recovery tool that allows you to restore the BIOS file when it fails or gets corrupted during the updating process. You can update a corrupted BIOS file using the motherboard support CD or the floppy disk that contains the updated BIOS
  • Asus P5MT-C | User Manual - Page 62
    support CD to the optical drive. 3. The utility displays the following message and automatically checks the floppy disk for the original or updated BIOS file. Bad BIOS checksum. Starting BIOS le "P5MT-C.ROM". Completed. Start flashing... DO NOT shut down or reset the system while updating the BIOS!
  • Asus P5MT-C | User Manual - Page 63
    ASUS Update: 1. Place the support CD in the optical drive. The Drivers menu appears. 2. Click the Utilities tab, then click Install ASUS Update VX.XX.XX. 3. The ASUS Update utility is copied to your system. Quit all Windows® applications before you update the BIOS using this utility. ASUS P5MT
  • Asus P5MT-C | User Manual - Page 64
    utility from the Windows® desktop by clicking Start > Programs > ASUS > ASUSUpdate > ASUSUpdate. The ASUS Update main window appears. 2. Select Update BIOS from the Internet option from the drop-down menu, then click Next. 3. Select the ASUS FTP site nearest you to avoid network traffic, or click
  • Asus P5MT-C | User Manual - Page 65
    > ASUS > ASUSUpdate > ASUSUpdate. The ASUS Update main window appears. 2. Select Update BIOS from a file option from the drop-down menu, then click Next. 3. Locate the BIOS file from the Open window, then click Save. 4. Follow the screen instructions to complete the update process. ASUS P5MT-C 4-9
  • Asus P5MT-C | User Manual - Page 66
    supports a programmable firmware chip that you can update using the provided utility described in section "4.1 Managing and updating your BIOS". Use the BIOS system using the BIOS Setup program so reset button on the system chassis. You can also restart by BIOS BIOS Menu." • The BIOS setup screens shown
  • Asus P5MT-C | User Manual - Page 67
    4.2.1 BIOS menu screen Menu items Menu bar Configuration fields General help System Time System Date Legacy Diskette A Primary IDE Master Primary IDE Slave keys to select items in the menu and change the settings. Some of the navigation keys differ from one screen to another. ASUS P5MT-C 4-11
  • Asus P5MT-C | User Manual - Page 68
    Third IDE Master Third IDE Slave Fourth IDE Master Fourth IDE Slave IDE Configuration :[ST320410A] :[ASUS CD-S520/A] :[Not Detected] :[Not Detected] :[Not Detected] :[Not Detected] System Information Main description of the selected item. Pop-up window Scroll bar 4-12 Chapter 4: BIOS setup
  • Asus P5MT-C | User Manual - Page 69
    appears, giving you an overview of the basic system information. Refer to section "4.2.1 BIOS menu screen" for information on the menu screen items and how to navigate through them Disabled] [360K, 5.25 in.] [1.2M , 5.25 in.] [720K , 3.5 in.] [1.44M, 3.5 in.] [2.88M, 3.5 in.] ASUS P5MT-C 4-13
  • Asus P5MT-C | User Manual - Page 70
    : MultiWord DMA-2 : Ultra DMA-5 : Supported Type LBA/Large Mode Block(Multi-sector Transfer) M PIO Mode DMA Mode SMART Monitoring 32Bit Data Transfer [Auto] [Auto] [Auto] [Auto] [Auto] [Auto] [Disabled] Select the type of device connected to the system. The BIOS automatically detects the values
  • Asus P5MT-C | User Manual - Page 71
    options: [Auto] [0] [1] [2] [3] [4] DMA Mode [Auto] Allows the BIOS to automatically select the DMA mode. Configuration option: [Auto] [SWDMA0] gure the item. IDE Configuration Configure SATA As Onboard IDE Operate Mode Enhanced Mode Support On IDE Detect Time Out (Sec) [Standard ASUS P5MT-C 4-15
  • Asus P5MT-C | User Manual - Page 72
    Support On [S-ATA] The default setting SATA encounter problems, revert to the default setting SATA. Con SATA As item is set to AHCI. IDE Detect Time Out [35] Selects the time out value for detecting ATA/ATAPI devices. Configuration options: [0] [5] [10] [15] [20] [25] [30] [35] 4-16 Chapter 4: BIOS
  • Asus P5MT-C | User Manual - Page 73
    /05 Processor Type : Genuine Intel(R) CPU 3.20 GHz Speed : 3200 MHz Count : 1 System Memory Size : 512 MB AMI BIOS Displays the auto-detected BIOS information. Processor Displays the auto-detected CPU specification. System Memory Displays the auto-detected system memory. ASUS P5MT-C 4-17
  • Asus P5MT-C | User Manual - Page 74
    malfunction. USB Configuration MPS Configuration Remote Access Configuration CPU Configuration Chipset Onboard Devices Configuration PCIPnP USB settings. USB Devices Enabled: None USB Function Legacy USB Support USB 2.0 Controller USB 2.0 Controller Mode BIOS EHCI Hand-Off [8 USB Ports] [Enabled]
  • Asus P5MT-C | User Manual - Page 75
    FullSpeed ] [HiSpeed ] BIOS EHCI Hand-Off [Enabled] This is a workaround for operating systems without EHCI hand-off support. The ownership should be claimed by the EHCI driver. Configuration options: [ [1.4] Allows you to choose the MPS revision. Configuration options: [1.1] [1.4] ASUS P5MT-C 4-19
  • Asus P5MT-C | User Manual - Page 76
    [None] Allows you to select the flow control for console redirection. Configuration options: [None] [Hardware] [Software] Redirection after BIOS POST [Always] Sets the redirection mode after the BIOS Power-On-Self-Test (POST). Some operating systems may not work when this item is set to [Always]. Con
  • Asus P5MT-C | User Manual - Page 77
    support for ANSI or VT100 terminals. Configuration options: [Disabled] [Enabled] 4.4.4 CPU Configuration The items in this menu show the CPU-related information that the BIOS automatically detects. Configure advanced CPU prefetch feature. Configuration options: [Disabled] [Enabled] ASUS P5MT-C 4-21
  • Asus P5MT-C | User Manual - Page 78
    to use the EIST feature. • The motherboard comes with a BIOS file that supports EIST. 4.4.5 Chipset The Chipset menu allows you to change the advanced Manual DRAM Frequency Setting or Auto by SPD. DRAM Frequency [Auto] Allows you to manually set the DRAM frequency. Setting to [Auto] allows the BIOS
  • Asus P5MT-C | User Manual - Page 79
    parameters are set according to the DRAM SPD (Serial Presence Detect). When disabled, you can manually set the DRAM timing parameters through the DRAM sub-items. Configuration options: [Disabled] [ or disable the memory remap feature. Configuration options: [Disabled] [Enabled] ASUS P5MT-C 4-23
  • Asus P5MT-C | User Manual - Page 80
    you to select the Serial Port1 base address. Configuration options: [Disabled] [2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3] Serial Port2 Mode [Normal] Allows the BIOS to select the Serial Port 2 mode. Configuration options: [Normal] [IrDA] [ASK IR] Parallel Port Address [378] Allows you to select the Parallel
  • Asus P5MT-C | User Manual - Page 81
    ] [PCI Device] [PCI Device] [PCI Device] [PCI Device] [PCI Device] [PCI Device] No: Lets the BIOS configure all the devices in the system. Yes: Lets the operating system configure Plug and Play (PnP) devices latter can function correctly. Configuration options: [Disabled] [Enabled] ASUS P5MT-C 4-25
  • Asus P5MT-C | User Manual - Page 82
    to enable or disable the Advanced Configuration and Power Interface (ACPI) support in the Advanced Programmable Interrupt Controller (APIC). When set to Enabled, the ACPI APIC table pointer is included in the RSDT pointer list. Configuration options: [Disabled] [Enabled] 4-26 Chapter 4: BIOS setup
  • Asus P5MT-C | User Manual - Page 83
    LAN or modem card. This feature requires an ATX power supply that provides at least 1A on the +5VSB lead. Configuration options: [Disabled] [Enabled] ASUS P5MT-C 4-27
  • Asus P5MT-C | User Manual - Page 84
    shows Installed. 4.5.3 Hardware Monitor Hardware Monitor CPU Temperature MB Temperature CPU Fan1 Speed CPU Fan2 Speed Front Fan1 Speed Front Fan2 345V] [ 5.094V] [ 4.824V] [ 3.040V] [11.880V] CPU Temperature CPU Temperature [xxxºC/xxxºF] MB Temperature [xxxºC/xxxºF] The onboard hardware monitor
  • Asus P5MT-C | User Manual - Page 85
    is below your setting, the CPU fan runs at a lower speed. To set, use the or key. VCORE Voltage, 3.3V Voltage, 5V Voltage, 5VSB Voltage, VBAT Voltage, 12V Voltage The onboard hardware monitor automatically detects the voltage output through the onboard voltage regulators. ASUS P5MT-C 4-29
  • Asus P5MT-C | User Manual - Page 86
    device items that appears on the screen depends on the number of devices installed in the system. Configuration options: [xxxxx Drive] [Disabled] 4-30 Chapter 4: BIOS setup
  • Asus P5MT-C | User Manual - Page 87
    When set to [Disabled], BIOS performs all the POST support for PS/2 mouse. Configuration options: [Disabled] [Enabled] [Auto] Wait for ʻF1ʼ If Error [Enabled] When set to Enabled, the system waits for the F1 key to be pressed when error occurs. Configuration options: [Disabled] [Enabled] ASUS P5MT
  • Asus P5MT-C | User Manual - Page 88
    as in setting a user password. To clear the supervisor password, select the Change Supervisor Password then press . The message "Password Uninstalled" appears. 4-32 Chapter 4: BIOS setup
  • Asus P5MT-C | User Manual - Page 89
    If you forget your BIOS password, you can clear it by erasing the CMOS Real Time Clock (RTC) RAM. See section "2.6 Jumpers" for information on how appears, type a password composed of at least six letters and/or numbers, then press . 3. Confirm the password when prompted. ASUS P5MT-C 4-33
  • Asus P5MT-C | User Manual - Page 90
    ] [Always] 4.7 Exit menu The Exit menu items allow you to load the optimal or failsafe default values for the BIOS items, and save or discard your changes to the BIOS items. Exit Options Exit & Save Changes Exit & Discard Changes Discard Changes Load Setup Defaults Exit system setup after saving
  • Asus P5MT-C | User Manual - Page 91
    program. If you made changes to fields other than System Date, System Time, and Password, the BIOS asks for a confirmation before exiting. Discard Changes This option allows you to discard the selections you made make other changes before saving the values to the non-volatile RAM. ASUS P5MT-C 4-35
  • Asus P5MT-C | User Manual - Page 92
    4-36 Chapter 4: BIOS setup
  • Asus P5MT-C | User Manual - Page 93
    This chapter provides information on RAID configurations for this motherboard. 5 RAID support
  • Asus P5MT-C | User Manual - Page 94
    Chapter summary 5 5.1 RAID configurations 5-1 5.2 Intel Matrix Storage Manager option ROM utility 5-3 5.3 LSI Logic Embedded SATA RAID Setup Utility 5-14 5.4 Global Array Manager 5-36 ASUS P5MT-C
  • Asus P5MT-C | User Manual - Page 95
    SATA RAID technology built-in the Intel® ICH7R SouthBridge chipset that allows you to configure IDE and Serial ATA hard disk drives as RAID sets. The motherboard supports Intel® Matrix Storage technology supported by the ICH7R chip allows rst the RAID driver from the support CD to a floppy disk
  • Asus P5MT-C | User Manual - Page 96
    disks for a RAID configuration: 1. Install the SATA hard disks into the drive bays. 2. Connect the SATA signal cables. 3. Connect a SATA power cable to the power connector on each drive. 5.1.3 Setting the RAID item in BIOS You must set the RAID item in the BIOS Setup before you can create a RAID set
  • Asus P5MT-C | User Manual - Page 97
    (s) from Serial ATA hard disk drives that are connected to the Serial ATA connectors supported by the Southbridge. To enter the Intel® Application Accelerator RAID Option ROM utility: select the menu options. The RAID BIOS setup screens shown in this section are for reference only and may not
  • Asus P5MT-C | User Manual - Page 98
    up/down arrow key to highlight a drive, then press to select. A small triangle marks the selected drive. Press after completing your selection. 5-4 Chapter 5: Driver installation
  • Asus P5MT-C | User Manual - Page 99
    to create this volume? (Y/N): 9. Press to create the RAID volume and return to the main menu, or to go back to the Create Volume menu. ASUS P5MT-C 5-5
  • Asus P5MT-C | User Manual - Page 100
    want to create this volume? (Y/N): 8. Press to create the RAID volume and return to main menu or to go back to Create Volume menu. 5-6 Chapter 5: Driver installation
  • Asus P5MT-C | User Manual - Page 101
    in the RAID volume capacity that you want then press when the Capacity item is highlighted. The default value indicates the maximum allowed capacity. ASUS P5MT-C 5-7
  • Asus P5MT-C | User Manual - Page 102
    5 set, then press . 3. When the RAID Level item is highlighted, press the up/down arrow key to select RAID 5(Parity), then press . 5-8 Chapter 5: Driver installation
  • Asus P5MT-C | User Manual - Page 103
    to create this volume? (Y/N): 9. Press to create the RAID volume and return to the main menu or to go back to the Create Volume menu. ASUS P5MT-C 5-9
  • Asus P5MT-C | User Manual - Page 104
    "VolumeX"? (Y/N): 3. Press to delete the RAID set and return to the utility main menu; otherwise, press to return to the Delete Volume menu. 5-10 Chapter 5: Driver installation
  • Asus P5MT-C | User Manual - Page 105
    . This window appears. [ CONFIRM EXIT ] Are you sure you want to exit? (Y/N): 2. Press to exit or press to return to the utility main menu. ASUS P5MT-C 5-11
  • Asus P5MT-C | User Manual - Page 106
    Ctrl> + to enter the Intel Matrix Storage Manager RAID configuration. 2. If there is a non-RAID SATA Hard Disk available, the utility will prompt to rebuild the RAID. Press , then use up/down arrow keys the degraded RAID volume is changed to "Rebuild". 5-12 Chapter 5: Driver installation
  • Asus P5MT-C | User Manual - Page 107
    SATA Port. Select a destination disk with the same size as the original hard disk. 2. Reboot the system and then follow the steps in section "Rebuilding the RAID with other non-RAID disk" on page 5-12. 5.2.9 Setting the Boot array in the BIOS , select OK, then press . ASUS P5MT-C 5-13
  • Asus P5MT-C | User Manual - Page 108
    RAID 1, and RAID 10 set(s) from SATA hard disk drives connected to the SATA connectors supported by the motherboard Southbridge chip. The LSI Logic Embedded SATA RAID automatically configures a RAID 1 (Mirrored) set when the SATA is configured as RAID in the BIOS and you installed two hard disk drives
  • Asus P5MT-C | User Manual - Page 109
    the logical drives of a created RAID set 5.3.1 Creating a RAID set The LSI Logic Embedded SATA RAID Setup Utility allows you to create a RAID 0 or RAID 1 set using two types of ). In New Configuration, you manually set the logical drive parameters and assign the set size and stripe size (RAID 1 only
  • Asus P5MT-C | User Manual - Page 110
    Configuration, then press . 3. The ARRAY SELECTION MENU displays the available drives connected to the SATA ports. Select the drives you want to include in the RAID set, then press . When selected disk drive displays at the bottom of the screen. 5-16 Chapter 5: Driver installation
  • Asus P5MT-C | User Manual - Page 111
    the configurable array, then press . The logical drive information appears including a Logical Drive menu that allows you to change the logical drive parameters. ASUS P5MT-C 5-17
  • Asus P5MT-C | User Manual - Page 112
    array block size. For multimedia computer systems used mainly for audio and video editing, we recommend a higher array block size for optimum performance. 5-18 Chapter 5: Driver installation
  • Asus P5MT-C | User Manual - Page 113
    10. When finished setting the selected logical drive configuration, select Accept from the menu, then press . 11. Follow steps 5 to 10 to configure additional logical drives. 12. When prompted, save the configuration, then press to return to the Management Menu. ASUS P5MT-C 5-19
  • Asus P5MT-C | User Manual - Page 114
    >. 5. Key in the desired logical drive size, then press . 6. Follow steps 8 to 12 of the previous section to create the RAID set. 5-20 Chapter 5: Driver installation
  • Asus P5MT-C | User Manual - Page 115
    Configuration, then press . 3. The ARRAY SELECTION MENU displays the available drives connected to the SATA ports. Select the drive(s) you want to include in the RAID set, then press . When of the selected hard disk drive displays at the bottom of the screen. ASUS P5MT-C 5-21
  • Asus P5MT-C | User Manual - Page 116
    figurable array, then press . The logical drive information appears including a Logical Drive menu that allows you to change the logical drive parameters. 5-22 Chapter 5: Driver installation
  • Asus P5MT-C | User Manual - Page 117
    size, then press . 9. Follow steps 8 to 12 of the Creating a RAID set: Using Easy Configuration section to add the new RAID configuration. ASUS P5MT-C 5-23
  • Asus P5MT-C | User Manual - Page 118
    select the logical drive to initialize. Use the arrow keys to select the logical drive from the Logical Drive selection, then press . 5-24 Chapter 5: Driver installation
  • Asus P5MT-C | User Manual - Page 119
    drive without confirmation. Initializing a logical drive(s) erases all data on the drive. 4. A progress bar appears on screen. If desired, press to abort initialization. ASUS P5MT-C 5-25
  • Asus P5MT-C | User Manual - Page 120
    5. When initialization is completed, press . Using the Objects command To initialize the logical drives using the Objects command: 1. From the Management Menu, highlight Objects, then press . 5-26 Chapter 5: Driver installation
  • Asus P5MT-C | User Manual - Page 121
    2. Select Logical Drive from the Objects sub-menu, then press . 3. Select the logical drive to initialize from the Logical Drives sub-menu, then press . 4. Select Initialize from the pop-up menu, then press to start initialization. ASUS P5MT-C 5-27
  • Asus P5MT-C | User Manual - Page 122
    the drive without confirmation. 6. A progress bar appears on screen. If desired, press to abort initialization. 7. When initialization is completed, press . 5-28 Chapter 5: Driver installation
  • Asus P5MT-C | User Manual - Page 123
    5.3.4 Rebuilding failed drives You can manually rebuild failed hard disk drives using the Rebuild or Objects command Enter>. 2. The PHYSICAL DRIVES SELECTION MENU displays the available drives connected to the SATA ports. Select the drive you want to rebuild, then press . ASUS P5MT-C 5-29
  • Asus P5MT-C | User Manual - Page 124
    pop-up menu, then press . 4. When prompted, press to to rebuild the drive. 5. When rebuild is complete, press any key to continue. 5-30 Chapter 5: Driver installation
  • Asus P5MT-C | User Manual - Page 125
    you to select the logical drive to check. Use the arrow keys to select the logical drive from the Logical Drive selection, then press . ASUS P5MT-C 5-31
  • Asus P5MT-C | User Manual - Page 126
    . • Abort - Aborts the consistency check. When you restart checking, it continues from zero percent. 5. When checking is complete, press any key to continue. 5-32 Chapter 5: Driver installation
  • Asus P5MT-C | User Manual - Page 127
    from the pop-up menu, then press . 4. When prompted, press to to check the drive. 5. When checking is complete, press any key to continue. ASUS P5MT-C 5-33
  • Asus P5MT-C | User Manual - Page 128
    select Yes from the Clear Configuration? dialog box, then press . The utility clears the current array. 3. Press any key to continue. 5-34 Chapter 5: Driver installation
  • Asus P5MT-C | User Manual - Page 129
    > to select the bootable logical drive from the list, then press . 3. The logical drive is selected as boot drive. Press any key to continue. ASUS P5MT-C 5-35
  • Asus P5MT-C | User Manual - Page 130
    You may also create a RAID set(s) in Windows® operating environment using the Global Array Manager (GAM) application. The GAM application is available from the motherboard support CD. Refer to the GAM user guide in the motherboard support CD for details. 5-36 Chapter 5: Driver installation
  • Asus P5MT-C | User Manual - Page 131
    This chapter provides information on RAID, LAN and VGA driver installation for this motherboard. 6 Driver installation
  • Asus P5MT-C | User Manual - Page 132
    Chapter summary 6 6.1 RAID driver installation 6-1 6.2 LAN driver installation 6-11 6.3 VGA driver installation 6-13 6.4 Management applications and utilities installation 6-15 ASUS P5MT-C
  • Asus P5MT-C | User Manual - Page 133
    the option 7. Press . 8. Follow screen instructions to create the driver disk. For systems with Red Hat® Enterprise versions that are not listed in the Makedisk menu, explore the support CD and copy the RAID driver disk from the following path: \Drivers\ICH7R\LSI\Linux. ASUS P5MT-C 6-1
  • Asus P5MT-C | User Manual - Page 134
    32-bit and 64-bit OS RAID driver disk for the LSI is located in: \Drivers\LSI\Driver\Makedisk\Win32_64 3. Insert a formatted high-density floppy disk to the floppy disk drive. 4. Follow screen instructions to complete the process. 5. After creating a RAID driver disk, eject the floppy disk, then write
  • Asus P5MT-C | User Manual - Page 135
    OS During Windows® 2000/2003 Server OS installation To install the RAID controller driver when installing Windows® 2000/2003 Server OS: 1. Boot the computer using need to install a third party SCSI or RAID driver..." appears at the bottom of the screen. 3. When prompted, press to specify an
  • Asus P5MT-C | User Manual - Page 136
    4. Insert the RAID driver disk you created earlier to the floppy disk drive, then press . 5. Select the RAID controller driver from the list, then press . For LSI Logic Embedded SATA RAID driver, select LSI Logic Embedded SATA RAID. 6-4 Chapter 6: Driver installation
  • Asus P5MT-C | User Manual - Page 137
    SATA RAID Controller (Desktop ICH7R). 6. The Windows® 2000/2003 Setup loads the RAID controller drivers from the RAID driver disk. When prompted, press to continue installation. 7. Setup then proceeds with the OS installation. Follow screen instructions in the system. ASUS P5MT-C 6-5
  • Asus P5MT-C | User Manual - Page 138
    5. Right-click the RAID controller item, then select Properties. 6. Click the Driver tab, then click the Update Driver button. 7. The Upgrade Device Driver Wizard window appears. Click Next. 8. Insert the RAID driver disk you created earlier to the floppy disk drive. 9. Select the option "Search for
  • Asus P5MT-C | User Manual - Page 139
    driver, the Intel(R) 82801GR/GH SATA RAID Controller item should appear. 4. Right-click the RAID controller driver item, then select Properties from the menu. 5. Click the Driver tab, then click the Driver Details button to display the RAID controller drivers. 6. Click OK when finished. ASUS P5MT
  • Asus P5MT-C | User Manual - Page 140
    Red Hat® Enterprise ver. 3.0 To install the RAID controller driver when installing Red Hat® Enterprise ver. 3.0 OS: 1. Boot the system from the Red Hat® Installation CD. 2. At the boot:, type linux dd , then press . 6-8 Chapter 6: Driver installation
  • Asus P5MT-C | User Manual - Page 141
    3. Select Yes using the key when asked if you have the driver disk. Press 4. Select fd0 using the key when asked to select the driver disk source. Press to move the cursor to OK, then press . ASUS P5MT-C 6-9
  • Asus P5MT-C | User Manual - Page 142
    prompted, insert the Red Hat® Enterprise ver. 3.0 RAID driver disk to the floppy disk drive, select OK, then press . The drivers for the RAID controller are installed to the system. 6. When asked if you will load additional RAID controller drivers, select No, then press . 6-10 Chapter
  • Asus P5MT-C | User Manual - Page 143
    . Click Cancel to close this window. • If Autorun is NOT enabled in your computer, browse the contents of the support CD to locate the file ASSETUP.EXE from the BIN folder. Double-click the ASSETUP.EXE to run the CD. 3. Click the Broadcom 5753 Driver option to begin installation. ASUS P5MT-C 6-11
  • Asus P5MT-C | User Manual - Page 144
    Click Next when the InstallShield Wizard window appears. Follow screen instructions to continue installation. 6.2.2 Red Hat® Enterprise ver. 3.0 Follow these instructions when installing the Broadcom® Gigabit LAN controller base driver for the Red Hat® Enterprise ver. 3.0 operating system. Building
  • Asus P5MT-C | User Manual - Page 145
    the LAN controller and displays a New Hardware Found window. Click Cancel to close this window. 3. Click the item ATI Rage XL Display Driver from the Drivers menu. 4. The ATI Windows 2000 Driver window appears. Click Next. Follow screen instructions to complete installation. ASUS P5MT-C 6-13
  • Asus P5MT-C | User Manual - Page 146
    during system installation. There is no need to install an additional driver(s) to support the onboard VGA. Verifying the VGA driver installation To verify if the ATI® RAGE XL VGA drivers are properly installed in a Windows® 2000/2003 Server operating system: 1. Right-click the My Computer icon
  • Asus P5MT-C | User Manual - Page 147
    CD are subject to change at any time without notice. Visit the ASUS website (www.asus.com) for updates. 6.4.1 Running the support CD Place the support CD to the optical drive. The CD automatically displays the Drivers menu if Autorun is enabled in your computer. If Autorun is NOT enabled in your
  • Asus P5MT-C | User Manual - Page 148
    applications and utilities that the motherboard supports. Click on an item to install. 6.4.5 Contact information Click the Contact tab to display the ASUS contact information. You can also find this information on the inside front cover of this user guide. 6-16 Chapter 6: Driver installation
  • Asus P5MT-C | User Manual - Page 149
    This appendix includes additional information that you may refer to when configuring the motherboard. Reference A information
  • Asus P5MT-C | User Manual - Page 150
    Appendix summary A A.1 Intel® EM64T A-1 A.2 Enhanced Intel SpeedStep® Technology (EIST A-1 A.3 Intel® Hyper-Threading Technology A-3 A.4 Block diagrams A-4 ASUS P5MT-C
  • Asus P5MT-C | User Manual - Page 151
    . A.2.1 System requirements Before using EIST, check your system if it meets the following requirements: • Intel® Pentium® 4 processor with EIST support • BIOS file with EIST support • Operating system with EIST support (Windows® Server 2003 SP1/ Linux 2.6 kernel or later versions) ASUS P5MT-C A-1
  • Asus P5MT-C | User Manual - Page 152
    A.2.2 Using the EIST To use the EIST feature: 1. Turn on the computer, then enter the BIOS Setup. 2. Go to the Advanced Menu, highlight CPU Configuration, then press . 3. Set the Intel(R) SpeedStep Technology item to [Automatic], then press . See page 4-22 for details. 4. Press to
  • Asus P5MT-C | User Manual - Page 153
    up the system and enter the BIOS Setup. Under the Advanced Menu, make sure that the item Hyper-Threading Technology is set to Enabled. See page 4-22 for details. The BIOS item appears only if you installed a CPU that supports Hyper-Threading Techonology. 3. Restart the computer. ASUS P5MT-C A-3
  • Asus P5MT-C | User Manual - Page 154
    A.4 Block diagrams A-4 Appendix: CPU features
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
Motherboard
P5MT-C