Asus P5MT-C User Manual - Page 41
to use the LSI Logic Embedded SATA RAID Setup Utility default
View all Asus P5MT-C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
6. Gigabit LAN controller setting (3-pin LAN_EN1, LAN_EN2) These jumpers allow you to enable or disable the onboard Broadcom® BCM5753 Gigabit LAN1 or LAN2 controller. Set to pins 1-2 to activate the Gigabit LAN controller. ® P5MT-C LAN_EN1 3 2 2 2 1 Enable (Default) Disable P5MT-C LAN_EN1 Setting ® P5MT-C LAN_EN2 12 23 2 Enable (Default) Disable P5MT-C LAN_EN2 Setting 7. RAID controller selection (3-pin RAID_SEL1) This jumper allows you to select the RAID configuration utility to use when you create disk arrays. Place the jumper caps over pins 1-2 if you want to use the LSI Logic Embedded SATA RAID Setup Utility (default); otherwise, place the jumper caps to pins 2-3 to use the Intel® Matrix Storage Manager. ® P5MT-C 2 P5MT-C RAID_SEL1 Setting RAID_SEL1 1 2 LSI RAID ROM (Default) 2 3 INTEL RAID ROM ASUS P5MT-C 2-21