Asus P5P800S P5P800S User''s Manual English Edition E1809 - Page 67

DRAM CAS# Latency [2.5 Clocks] Controls the latency between the SDRAM read command and the time the data actually becomes available. Configuration options: [2.0 Clocks] [2.5 Clocks] [3.0 Clocks] DRAM RAS# Precharge [4 Clocks] Controls the idle clocks after issuing a precharge command to the DDR SDRAM. Configuration options: [4 Clocks] [3 Clocks] [2 Clocks] DRAM RAS# to CAS# Delay [4 Clocks] Controls the latency between the DDR SDRAM active command and the read/write command. Configuration options: [4 Clocks] [3 Clocks] [2 Clocks] DRAM RAS# Activate to Precharge [8 Clocks] Sets the RAS Activate timing to Precharge timing. Configuration options: [8 Clock] [7 Clocks] [6 Clocks] [5 Clocks] DRAM Burst Length [8 Clocks] Sets the DRAM Write Recover Time. Configuration options: [4 Clocks] [8 Clocks] Memory Acceleration Mode [Auto] Enables or sets the memory acceleration mode feature. When Enabled, the CPU to memory latency is minimized to boost performance. Configuration options: [Enabled] [Auto] Setting to Enabled may cause the system to become unstable! If this happens, revert to the default setting Auto. DRAM Idle Timer [Auto] Sets the DRAM idle timer. Configuration options: [Infinite] [0T] [8t] [16T] [64T] [Auto] DRAM Refresh Rate [Auto] Sets the DRAM refresh rate. Configuration options: [Auto] [15.6 uSec] [7.8 uSec] [64 uSec] [64T] Graphics Adapter Priority [AGP/PCI] Allows you to select the graphics adapter to use as primary boot device. Configuration options: [AGP/PCI] [PCI/AGP] Graphics Aperture Size [ 64MB] Allows you to set the size of mapped memory for the AGP graphic data. Configuration options: [ 4MB] [ 8MB] [16MB] [32MB] [64MB] [128MB] [256MB] ASUS P5P800S 2-23