Asus P5QLD PRO P5QLD PRO user's manual - Page 87

Memory Remap Feature [Enabled] Allows you to enabled or disable the remapping of the overlapped PCI memory above the total physical memory. Enable this option only when you install 64-bit operating system. Configuration options: [Disabled] [Enabled] Memory Hole [Disabled] Allows you to configure the memory hole. Configuration options: [Disabled] [15MB-16MB] Initiate Graphic Adapter [PEG/PCI] Allows you to decide which graphics controller to use as the primary boot device. Configuration options: [PCI/PEG] [PEG/PCI] 4.5.3 Onboard Devices Configuration BIOS SETUP UTILITY Advanced Configure Win667HG Super IO Chipset High Definition Audio Front Panel Type SPDIF_OUT Mode Setting JMB368 IDE controller Onboard PCIE GbE LAN LAN Option ROM [Enabled] [HD Audio] [SPDIF Output] [Enabled] [Enabled] [Disabled] Serial Port1 Address [3F8/IRQ4] Enable or Disable High Definition Audio Controller Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit v02.61 (C)Copyright 1985-2008, American Megatrends, Inc. High Definition Audio [Enabled] Allows you to enable or disable the High Definition Audio. The following item appears only when you enable this item. Configuration options: [Enabled] [Disabled] Front Panel Type [HD Audio] Allows you to set the front panel audio connector (AAFP) mode to legacy AC'97 or high-definition audio depending on the audio standard that the front panel audio module supports. Configuration options: [AC97] [HD Audio] SPDIF_OUT Mode Setting [SPDIF Output] Allows you to set the SPDIF_OUT mode. Configuration options: [HDMI Output] [SPDIF Output] JMB368 IDE controller [Enabled] Allows you to disable or enable the onboard JMB368 IDE controller. Configuration options: [Enabled] [Disabled] ASUS P5QLD PRO 4-25