Asus P5SD2-X Motherboard Installation Guide - Page 46
Front panel audio connector 10-1 pin AAFP, Chassis intrusion connector 4-1 pin CHASSIS
UPC - 610839130702
View all Asus P5SD2-X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
10. Front panel audio connector (10-1 pin AAFP) This connector is for a chassis-mounted front panel audio I/O module that supports either High Definition Audio or legacy AC '97 audio standard. Connect one end of the front panel audio I/O module cable to this connector. P5VD2-X ® GND PRESENCE# SENSE1_RETUR SENSE2_RETUR Azalia-compliant pin definition Legacy AC'97-compliant pin definition AAFP AGND NC NC NC MIC2 MICPWR Line out_R NC Line out_L PORT1 L PORT1 R PORT2 R SENSE_SEND PORT2 L P5VD2-X Analog front panel connector • Use a chassis that provides a high-definition audio front panel audio I/O to use the high-definition audio features. • By default, this connector is set to [AC97]. If you want to connect a HighDefinition front panel audio module to this connector, set the Front Panel Support Type item in the BIOS Setup to [HD Audio]. See page 2-25 for details. 11. Chassis intrusion connector (4-1 pin CHASSIS) This connector is for a chassis-mounted intrusion detection sensor or switch. Connect one end of the chassis intrusion sensor or switch cable to this connector. The chassis intrusion sensor or switch sends a high-level signal to this connector when a chassis component is removed or replaced. The signal is then generated as a chassis intrusion event. By default, the pins labeled "Chassis Signal" and "Ground" are shorted with a jumper cap. Remove the jumper caps only when you intend to use the chassis intrusion detection feature. +5VSB_MB Chassis Signal GND P5VD2-X ® CHASSIS 1-34 (Default) P5VD2-X Chassis intrusion connector Chapter 1: Product introduction