Asus P5V-VM SE DH P5VD2-VM English Edition User''s Manual - Page 99
Create Array
View all Asus P5V-VM SE DH manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Create Array From the VIA RAID BIOS utility main menu, select Create Array then press . The main menu items on the upper-left corner of the screen are replaced with create array menu options. VIA Tech. VT8251 Series SATA RAID BIOS Ver 1.xx Auto Setup For Data Security Array Mode RAID 1 (Mirroring) Select Disk Drives Start Create Process Create a RAID array with the hard disks attached to VIA RAID controller F1 : View Array/Disk Status ↑,↓ : Move to next item Enter : Confirm the selection ESC : Exit Channel Drive Name Array Name Mode Size(GB) Status Serial_Ch0 Master XXXXXXXXXXX ARRAY 0 SATA 999.99 XXXXXXX Serial_Ch1 Master XXXXXXXXXXX ARRAY 0 SATA 999.99 XXXXXXX RAID 0 for performance 1. From the create array menu, select Array Mode, then press . The supported RAID configurations appear on a pop-up menu. RAID 0 for performance RAID 1 for data protection RAID SPAN for capacity 2. Select RAID 0 for performance then press . From this point, you may choose to auto-configure the RAID array by selecting Auto Setup for Performance or manually configure the RAID array for stripped sets. If you want to auto-configure, proceed to the next step, otherwise, skip to step 5. 3. Select Auto Setup for Performance and press . The following confirmation message appears. Auto create array will destroy all data on disks, Continue? (Y/N) ASUS P5VD2-VM/P5V-VM SE DH 3-