Asus P7H55 User Manual - Page 51

The following two items appear only when you set the Ai Overclock Tuner item to [Manual], [D.O.C.P.] or [X.M.P.]. BCLK Frequency [XXX] Allows you to adjust the Internal Base Clock (BCLK). Use the and keys to adjust the value. You can also type the desired value using the numeric keypad. The values range from 80 to 500. PCIE Frequency [100] Allows you to set the PCI Express frequency. Use the and keys to adjust the PCIE frequency. The values range from 100 to 200. DRAM Frequency [Auto] Allows you to set the DDR3 operating frequency. Configuration options: [Auto] [DDR3-800MHz] [DDR3-1066MHz] [DDR3-1333MHz] The DRAM Frequency configuration options vary with the BCLK Frequency item settings. Selecting a very high DRAM frequency may cause the system to become unstable! If this happens, revert to the default setting. QPI Frequency [Auto] Allows you to set the QPI operating frequency. Configuration options: [Auto] [4270MHz] [4800MHz] 2.4.6 DRAM Timing Control [Auto] The items in this menu allow you to set the DRAM timing control features. The configuration options for some of the following items vary depending on the DIMMs you install on the motherboard. 1st Information: 9-9-9-24-4-74-10-7-20 The values vary depending on your settings of the following sub-items: DRAM CAS# Latency [Auto] Configuration options: [Auto] [3 DRAM Clock] [4 DRAM Clock] - [10 DRAM Clock] [11 DRAM Clock] DRAM RAS# to CAS# Delay [Auto] Configuration options: [Auto] [3 DRAM Clock] [4 DRAM Clock] - [9 DRAM Clock] [15 DRAM Clock] DRAM RAS# PRE Time [Auto] Configuration options: [Auto] [3 DRAM Clock] [4 DRAM Clock] - [9 DRAM Clock] [15 DRAM Clock] DRAM RAS# ACT Time [Auto] Configuration options: [Auto] [3 DRAM Clock] [4 DRAM Clock] - [30 DRAM Clock] [31 DRAM Clock] Chapter 2: BIOS information 2-13