Asus P8P67 LE User Manual - Page 46
Marvell, Serial ATA 6.0Gb/s connector 7-pin SATA6G_E1 [navy blue] - driver
View all Asus P8P67 LE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
10. Marvell® Serial ATA 6.0Gb/s connector (7-pin SATA6G_E1 [navy blue]) This connector connects to Serial ATA 6.0 Gb/s hard disk drives via Serial ATA 6.0 Gb/s signal cables. P8P67 LE SATA6G_E1 GND RSATA_TXP1 RSATA_TXN1 GND RSATA_RXP1 RSATA_RXN1 GND P8P67 LE Marvell® SATA 6.0 Gb/s connector • The SATA6G_E1 (navy blue) connector is for data drives only. ATAPI device is not supported. • You must install Windows® XP Service Pack 3 or later versions before using Serial ATA hard disk drives. • When using hot-plug and NCQ, set the Marvell Storage Controller item in the BIOS to [AHCI Mode]. Refer to section 2.5.6 Onboard Devices Configuration for details. • Press + during POST to enter the Marvell RAID utility to create or delete a RAID configuration. • If you want to install a Windows operating system to a RAID configuration created using the Marvell SATA controller, you have to create a RAID driver disk using the motherboard support DVD and load the driver during OS installation. For 32/64bit Windows XP OS, load first the Marvell shared library driver, and then load Marvell 91xx SATA Controller Driver. For Windows Vista / Windows 7 OS, load only the Marvell 91xx SATA Controller Driver. 1-34 ASUS P8P67 LE