Asus P9X79 User Manual - Page 96
S.M.A.R.T. Status Check [Enabled]
View all Asus P9X79 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
SATA Mode [AHCI Mode] Allows you to set the SATA configuration. [Disabled] [IDE Mode] [AHCI Mode] [RAID Mode] Disables the SATA function. Set to [IDE Mode] when you want to use the Serial ATA hard disk drives as Parallel ATA physical storage devices. Set to [AHCI Mode] when you want the SATA hard disk drives to use the AHCI (Advanced Host Controller Interface). The AHCI allows the onboard storage driver to enable advanced Serial ATA features that increases storage performance on random workloads by allowing the drive to internally optimize the order of commands. Set to [RAID Mode] when you want to create a RAID configuration from the SATA hard disk drives. The following items appear only when you set the previous item to [IDE Mode]. Serial-ATA Controller 0 [Enhanced] [Disabled] Disables the SATA function. [Enhanced] Set to [Enhanced] to support two SATA 6.0 Gb/s and two SATA 3.0 Gb/s devices. [Compatible] Set to [Compatible] when using Windows 98/NT/2000/MS-DOS. Up to four SATA devices are supported under these operating systems. Serial-ATA Controller 1 [Enhanced] [Disabled] Disables the SATA function. [Enhanced] Set to [Enhanced] to support 2 SATA 3Gb/s devices. S.M.A.R.T. Status Check [Enabled] S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) is a monitor system. When read/write of your hard disk errors occur, this feature allows the hard disk to report warning messages during the POST. Configuration options: [Disabled] [Enabled] SATA6G_1 (Gray) Hot Plug [Disabled] This item appear only when you set the previous item to [AHCI Mode] and [RAID Mode]. It's allow user to enabled/disabled SATA Hot Plug Support. �C�o��n�fi�g�u��ra��ti�o�n��o�p��ti�o�n��s�:�[�D�i�s�a�b��le��d�] [Enabled]. SATA6G_2 (Gray) Hot Plug [Disabled] This item appear only when you set the previous item to [AHCI Mode] and [RAID Mode]. It's allow user to enabled/disabled SATA Hot Plug Support. �C�o��n�fi�g�u��ra��ti�o�n��o�p��ti�o�n��s�:�[�D�i�s�a�b��le��d�] [Enabled]. Chapter 3 3-30 Chapter 3: BIOS setup