Asus PCI-DA2200 PCI-DA2200 User Guide English Version - Page 63
Con Card, Con SCSI
View all Asus PCI-DA2200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Support for 3 Disks or More (MS-DOS v5.0 or Above) For MS-DOS version below 5.0, only supports up to 2 disks, don't set this option to "Yes" on such versions DOS system. Support for NOT-ZERO SCSI LUN Set this option to "Yes", if you want the BIOS to support all SCSI Target LUNs, 0 to 7. Configure BIOS Devices Logical Device SCSI ID Scanned By BIOS Logical Device SCSI ID Scanned By BIOS #0 #1 #2 #3 #4 #5 #6 #7 Yes Yes Yes Yes Yes Yes Yes Yes #8 #9 #10 #11 #12 #13 #14 #15 Yes Yes Yes Yes Yes Yes Yes Yes If this option is selected, a status list of SCSI devices scanned by BIOS at BIOS initialization will appear. If a SCSI device is not scanned by BIOS, then it will not be installed by BIOS. 7.1.2. Configure Card ISA Emulation Mode IO Port Address Disabled Disk Access Delay on Power-up (Sec) 15 ISA Emulation Mode If you are going to use ASUS PCI-DA2200 device driver distributed by Infortrend, you MUST set the IO port address to "Disabled". You can select an IO Port address from a list by pressing [Enter]. 7.1.3. Configure SCSI Configuration Color/Monochrome Configure BIOS Configure Card Configure SCSI SCSI Channel 0 Configure RAID SCSI Channel 1 Reset to Defaults ASUS PCI-DA2200 User's Manual 7-3