Asus PIKE 2008 User Manual - Page 33
Viewing SAS topology, Adapter Properties
View all Asus PIKE 2008 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
2.2.5 Viewing SAS topology 1. From the Adapter Properties screen, select SAS Topology, then press . LSI Corp Config Utility Adapter Properties -- SAS2008 v7.05.01.00 (2010.02.09) Adapter PCI Slot PCI Address(Bus/Dev) MPT Firmware Revision SAS Address NVDATA Version Status Boot Order Boot Support PIKE 2008 07 04:00 5.00.00.00-IR 500E0180:1280E000 05.02 Enabled 0 [Enabled BIOS & OS] RAID Properties SAS Topology Advanced Adapter Properties Esc = Exit Menu F1/Shift+1 = Help Enter = Select Item -/+/Enter = Change Item 2. Information about the volume and its member-disks are then displayed. LSI Corp Config Utility SAS Topology -- SAS2008 PIKE 2008(04:00) ﹂ Controller ﹂ RAID1 VOL v7.05.01.00 (2010.02.09) Device Identifier Direct Attach Devices LSI Logical Volume 3000 Device Info Controller Esc = Exit F1/Shift+1 = Help Alt+D = Device Properties Alt+M = More Keys You may press to display device properties, or to display more keys. LSI Corp Config Utility SAS Topology -- SAS2008 v7.05.01.00 (2010.02.09) More keys for the SAS Topology display: Alt+B = Select or deselect a device as the preferred boot device Alt+A = Select or deselect a device as the alternate boot device Enter = On a SAS Enclosure or Expander - Expand or Collapse Item Enter = On a Disk Drive - Turn on the Locate LED (next key press turns off) ASUS PIKE 2008 2-19