Asus PIO-B85M User Guide - Page 52
System Agent Configuration, S.M.A.R.T. Status Check [Enabled]
View all Asus PIO-B85M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Aggressive LPM Support [Auto] This item appears only when you set the previous item to [AHCI] and allows you to enable or disable PCH entering link power state aggressively. Configuration options: [Auto] [Disabled] [Enabled] IDE Legacy / Native Mode Selection [Native] This item appears only when you set the SATA Mode Selection item to [IDE]. Configuration options: [Native] [Legacy] S.M.A.R.T. Status Check [Enabled] S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) is a monitor system. When read/write of your hard disk errors occur, this feature allows the hard disk to report warning messages during the POST. Configuration options: [Enabled] [Disabled] Choose as MiniPCIE or MSATA [Auto] This item allows you to set an automatic detection between the mini PCIe devices and mSATA devices installed on the mSATA/mPCIe slot. [Auto] The system automatically detects the connected mSATA and mini PCIe devices and set a higher priority to mini PCIe interface. The connected device will then run at mini PCIe mode first than mSATA mode. The mSATA devices are available when no mini PCIe devices are installed. [MSATA] The system assigns the priority bandwidth to mSATA interface. [MiniPCIE] The system assigns the priority bandwidth to mini PCIe interface. Hot Plug [Disabled] These items appear only when you set the SATA Mode Selection item to [AHCI] and allow you to enable/disable SATA Hot Plug Support. Configuration options: [Disabled] [Enabled] 2.6.4 System Agent Configuration CPU Audio Device [Disabled] Allows you to enable or disable CPU SA Audio Device. Configuration options: [Enabled] [Disabled] Graphics Configuration Allows you to select a primary display from iGPU and PCIe graphical devices. Primary Display [Auto] Allows you to select which of the iGPU/PCIE Graphics device should be the Primary Display. Configuration options: [Auto] [IGPU] [PCIE] iGPU Memory [Auto] Allows you to select the amount of system memory allocated to DVMT 5.0 used by the iGPU. Configuration options: [Auto] [32M] [64M] [96M] [128M] [160M] [192M] [224M] [256M] [288M][320M] [352M] [384M] [416M] [448M] [480M] [512M] [1024M] Render Standby [Auto] Allows you to enable or disable Intel® Graphics Render Standby support to reduce iGPU power use when the system is idle. Configuration options: [Auto] [Disabled] [Enabled] 2-22 Chapter 2: Getting started