Asus PRIME B250M-PLUS Motherboard Pin Definition.English - Page 9

12. LVDS connector (40-pin LVDS) This connector is for an LCD monitor that supports Low- LVDS voltage Differential Signaling (LVDS) interface. ODD_Lane3_P ODD_Lane3_N ODD_Lane2_P ODD_Lane2_N ODD_Lane1_P ODD_Lane1_N ODD_Lane0_P ODD_Lane0_N EVEN_Lane3_P EVEN_Lane3_N EVEN_Lane2_P EVEN_Lane2_N EVEN_Lane1_P EVEN_Lane1_N EVEN_Lane0_P EVEN_Lane0_N EDID_GND LCD_VCC LCD_VCC LCD_VCC Enable LVDS in the BIOS setup if the LVDS output is PIN 1 PIN 20 disabled by default. PIN 21 PIN 40 N/C EDID_3.3V LCD_GND LCD_GND LCD_GND ODD_CLK_P ODD_CLK_N BKLT_GND BLKT_GND BKLT_GND EDID_CLK BKLT_ENABLE BKLT_PWM_DIM EVEN_CLK_P EVEN_CLK_N BKLT_PWR BKLT_PWR BKLT_PWR N/C EDID_DATA 13. Embedded DisplayPort (40- pin eDP) This connector is for an internal embedded DisplayPort connection. EDP(Back) PIN 1 14. SATA 6.0Gb/s connectors (7-pin SATA6G) These connectors connect to SATA 6.0 Gb/s hard disk drives via SATA 6.0 Gb/s signal cables. SATA6G You must install Windows® XP Service Pack 3 or later version before using Serial ATA hard disk drives. GND RSATA_RXP4 RSATA_RXN4 GND RSATA_TXN4 RSATA_TXP4 GND 15. SATA EXPRESS connector (7-pin SATA6G, SATAEXPRESS) This connector connects to SATA 6.0 Gb/s hard disk drives via SATA 6.0 Gb/s signal cables. If you installed SATA hard disk drives, you can create a RAID 0, 1, 5, and 10 configuration with the Intel® Rapid Storage Technology through the onboard Intel® chipset. The SATAEXPRESS connector can support one SATA Express device or two SATA devices. GND RSATA_TXP1 RSATA_TXN1 GND RSATA_RXN1 RSATA_RXP1 GND GND RSATA_TXP2 RSATA_TXN2 GND RSATA_RXN2 RSATA_RXP2 GND Floating Device_Reset GND Detection SATAEXPRESS Motherboard Pin Definition 1-9