Asus PRIME H270-PLUS Users manual ENGLISH - Page 25

Booting the system in DOS environment To boot the system in DOS: 1. Insert the USB flash drive with the latest BIOS file and BIOS Updater to the USB port. 2. Boot your computer then press to launch the select boot device screen. 3. When the select boot device screen appears, insert the Support DVD into the optical drive then select the optical drive as the boot device. 4. When the booting message appears, press within five (5) seconds to enter FreeDOS prompt. 5. On the FreeDOS prompt, type d: then press to switch the disk from Drive C (optical drive) to Drive D (USB flash drive). Updating the BIOS file To update the BIOS file: 1. On the FreeDOS prompt, type bupdater /g and press . 2. On the BIOS Updater screen, press to switch from Files panel to Drives panel then select D:. Drives panel ASUSTeK BIOS Updater for DOS V1.31 [2014/01/01] Current ROM BOARD: PRIME H270-PLUS VER: 0207 (H :00 B :00) DATE: 08/25/2016 PATH: C:\ Update ROM BOARD: Unknown VER: Unknown DATE: Unknown C: FORMAN~1 D: PH270P.CAP 16779264 2015-06-04 21:14:34 Files panel Note [Enter] Select or Load [Up/Down/Home/End] Move [Tab] Switch [Esc] Exit [V] Drive Info 3. Press to switch from Drives panel to Files panel then press keys to select the BIOS file and press . 4. After the BIOS Updater checks the selected BIOS file, select Yes to confirm the BIOS update. The BIOS Backup feature is not supported due to security regulations. 5 Press any key to reboot the system to automatically launch EZ Flash 3. Wait until the BIOS update is completed. DO NOT shut down or reset the system while updating the BIOS to prevent system boot failure. Ensure to load the BIOS default settings to ensure system compatibility and stability. Select the Load Optimized Defaults item under the Exit BIOS menu. Chapter 2: BIOS information 2-4