Asus PRIME H570M-PLUS Users Manual English - Page 15

14. Front panel audio header This header is for a chassis-mounted front panel audio I/O module that supports HD audio standard. Connect one end of the front panel audio I/O module cable to this header. AGND NC SENSE1_RETUR SENSE2_RETUR • We recommend that you connect a high-definition front panel audio module to this header to avail of the motherboard's high- AAFP definition audio capability. PORT1 L PORT1 R PORT2 R SENSE_SEND PORT2 L • If you want to connect a high-definition front panel audio module to this header, set the Front Panel Type item in the BIOS setup to [HD Audio]. By default, this header is set to [HD Audio]. HD-audio-compliant pin definition 15. M.2 slot (Key E) The M.2(WIFI) slot allows you to install an M.2 Wi-Fi module (E-key, type 2230). 16. S/PDIF Out header This header is for an additional Sony/Philips Digital Interface (S/PDIF) port. SPDIF_OUT Connect the S/PDIF Out module cable to this header, then install the module to a slot opening at the back of the system chassis. +5V SPDIFOUT GND F_SPI_HOLD#_R T_SPI_MISO F_SPI_CS0#_R +3V_SPI F2_SPI_CS1#_R S_PLTRST# VCCSPI 17. SPI TPM header This header supports a Trusted Platform Module (TPM) system with a Serial Peripheral Interface (SPI), allowing you to securely store keys, digital certificates, passwords, and data. A TPM system also helps enhance TPM PIN 1 network security, protects digital identities, and ensures platform integrity. The SPI TPM module is purchased separately. T_SPI_MOSI T_SPI_CLK GND F_BIOS_WP#_R S_SPI_TPM_CS2# S_SPI_TPM_IRQ# 18. 20-3 pin System Panel header This header supports several chassis-mounted functions. • System Power LED header (PLED) The 2-pin header allows you to connect the System Power LED. The System Power LED lights up when the system is connected to a power source, or when you turn on the system power, and blinks when the system is in sleep mode. • Storage Device Activity LED header (HDD_LED) The 2-pin header allows you to connect the Storage Device Activity LED. The Storage Device Activity LED lights up or blinks when data is read from or written to the storage device or storage device add-on card. * Requires an ATX power supply ASUS PRIME H570M-PLUS 1-5