Asus PRIME H610M-A D4 Users Manual English - Page 11

Chapter 1: Product Introduction Product Introduction 1 1.1 Before you proceed Take note of the following precautions before you install motherboard components or change any motherboard settings. • Unplug the power cord from the wall socket before touching any component. • Before handling components, use a grounded wrist strap or touch a safely grounded object or a metal object, such as the power supply case, to avoid damaging them due to static electricity. • Before you install or remove any component, ensure that the ATX power supply is switched off or the power cord is detached from the power supply. Failure to do so may cause severe damage to the motherboard, peripherals, or components. 1.2 Motherboard overview 5 6 1 4 2 21.1cm(8.3in) KBMS HDMI VGA DP ATX_12V CHA_FAN2 DIGI+ VRM CPU_FAN ADD_GEN 2_2 10 ADD_GEN 2_3 DDR4 DIMM_A1 (64bit, 288-pin module) DDR4 DIMM_B1 (64bit, 288-pin module) USB_E12 ATX_PWR 24.4cm(9.6in) Place this side towards U32G2_12 LGA1700 5 the rear of the chassis LAN_USB_E34 PCIE SATA 3.0 X4 X M.2_1(SOCKET3) U32G1_34 15 M.2(WIFI) 8 4 AUDIO 2280 2260 2242 CHA_FAN1 PCIEX16(G4) BATTERY Ethernet 6 3 Super I/O M.2_2(SOCKET3) PCIE SATA 3.0 X2 X Intel® H610 2280 2260 2242 Audio Codec AAFP PCIEX1(G3) SPDIF_OUT COM RGB_HEADER2 COM_DEBUG CLRTC RGB_HEADER1 USB_56 USB_7 SATA6G_1 SATA6G_2 ADD_GEN 2_1 SATA6G_3 TPM 128Mb BIOS SPEAKER SATA6G_4 F_PANEL 19 17 14 16 13 11 12 10 9 7 18 • Unplug the power cord before installing or removing the motherboard. Failure to do so can cause you physical injury and damage motherboard components. • The pin definitions in this chapter are for reference only. The pin names depend on the location of the header/jumper/connector. ASUS PRIME H610M-A D4 1-1