Asus PRIME H610M-A WIFI D4 Users Manual English - Page 15

15. S/PDIF Out header This header is for an additional Sony/Philips Digital Interface (S/PDIF) port. Connect the S/PDIF Out module cable to this header, then install the module to a slot opening at the back of the system chassis. +5V SPDIFOUT GND SPDIF_OUT +5V GND GND Speaker Out 16. Speaker header The 4-pin header is for the chassis-mounted system warning speaker. The speaker allows you to hear system beeps and warnings. SPEAKER PIN 1 17. 10-1 pin System Panel header This header supports several chassis-mounted functions. • System power LED (2-pin +PWR_LED-) F_PANEL +PWR_LED- PWR_BTN PWR_LED+ PWR_LEDPWR GND This 2-pin header is for the system power LED. Connect the chassis power LED cable to this header. The system power LED lights up when you turn on the system power, and blinks when the system is in sleep mode. PIN 1 HDD_LED+ HDD_LED- Ground HWRST# (NC) • Hard disk drive activity LED (2-pin +HDD_LED-) This 2-pin header is for the HDD Activity LED. Connect the HDD Activity LED cable to this header. The HDD LED lights up or flashes when data is read from or written to the HDD. +HDD_LED- RESET • Power button/Soft-off button (2-pin PWR_BTN) This header is for the system power button. • Reset button (2-pin RESET)  This 2-pin header is for the chassis-mounted reset button for system reboot without turning off the system power. F_SPI_HOLD#_R T_SPI_MISO F_SPI_CS0#_R +3V_SPI F2_SPI_CS1#_R S_PLTRST# VCCSPI 18. SPI TPM header This header supports a Trusted Platform Module (TPM) system with a Serial Peripheral Interface (SPI), allowing you to securely store keys, digital certificates, passwords, and data. A TPM system also helps enhance TPM PIN 1 network security, protects digital identities, and ensures platform integrity. The SPI TPM module is purchased separately. T_SPI_MOSI T_SPI_CLK GND F_BIOS_WP#_R S_SPI_TPM_CS2# S_SPI_TPM_IRQ# ASUS PRIME H610M-A WIFI D4 1-5