Asus PRIME X570-P X570 Series BIOS Manual English - Page 42
Boot up NumLock State, Wait For 'F1' If Error, Option ROM Messages, Interrupt 19 Capture, AMI Native - drivers
View all Asus PRIME X570-P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
The following item appears only when you set the Boot Logo Display to [Auto] and [Full Screen]. Post Delay Time This item allows you to select a desired additional POST waiting time to easily enter the BIOS Setup. You can only execute the POST delay time during normal boot. Configuration options: [0 sec] - [10 sec] This feature only works when set under normal boot. The following item appears only when you set the Boot Logo Display to [Disabled]. Post Report This item allows you to select a desired POST report waiting time. Configuration options: [1 sec] - [10 sec] [Until Press ESC] Boot up NumLock State This item allows you to enable or disable power-on state of the NumLock. Configuration options: [On] [Off] Wait For 'F1' If Error This item allows your system to wait for the key to be pressed when error occurs. Configuration options: [Disabled] [Enabled] Option ROM Messages [Force BIOS] The third-party ROM messages will be forced to display during the boot sequence. [Keep Current] The third-party ROM messages will be displayed only if the third-party manufacturer had set the add-on device to do so. Interrupt 19 Capture [Enabled] Execute the trap right away. [Disabled] Execute the trap during legacy boot. AMI Native NVMe Driver Support This item allows you to enable or disable all NVMe device native OpROM. Configuration options: [On] [Off] Setup Mode [Advanced Mode] This item allows you to go to Advanced Mode of the BIOS after POST. [EZ Mode] This item allows you to go to EZ Mode of the BIOS after POST. 42 PRIME/PRO/TUF GAMING X570 Series BIOS Manual