Asus PRIME X570-P Users Manual English - Page 65

SMT Mode This item allows you enable or disable simultaneous multithreading. Configuration options: [Disabled] [Auto] Core Leveling Mode This item allows you to change the number of compute unit in the system. Configuration options: [Automatic mode] [One Computer Unit] 3.6.3 NB Configuration NB Configuration function varies based on the CPU installed. Primary Video Device Selects the primary display device. Configuration options: [IGFX Video] [PCIE Video] 3.6.4 SATA Configuration While entering Setup, the BIOS automatically detects the presence of SATA devices. The SATA Port items show Empty if no SATA device is installed to the corresponding SATA port. SATA Port Enable This item allows you to enable or disable the SATA Device. Configuration options: [Disabled] [Enabled] SATA Mode This item allows you to set the SATA configuration. [AHCI] [RAID] Set to [AHCI] when you want the SATA hard disk drives to use the AHCI (Advanced Host Controller Interface). The AHCI allows the onboard storage driver to enable advanced Serial ATA features that increases storage performance on random workloads by allowing the drive to internally optimize the order of commands. Set to [RAID] when you want to create a RAID configuration from the SATA hard disk drives. NVMe RAID mode This item allows you enable or disable the NVMe RAID mode. Configuration options: [Disabled] [Enabled] SMART Self Test S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) is a monitoring system that shows a warning message during POST (Power-on Self Test) when an error occurs in the hard disks. Configuration options: [On] [Off] SATA6G_1~6 (Gray), M.2_1 (Gray), M.2_2 (Gray) Select one item and click Enter to assign a new name for the item. Chapter 3 ASUS PRIME X570-P 3-13