Asus PRIME Z390-A Users Manual English - Page 81
PCH-FW Configuration, 3.6.7 Thunderbolt(TM) Configuration, 3.6.8 Onboard Devices Configuration
View all Asus PRIME Z390-A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
3.6.6 PCH-FW Configuration This item allows you to configure the firmware TPM. 3.6.7 Thunderbolt(TM) Configuration The items in this menu allow you to configure Thunderbolt settings. 3.6.8 Onboard Devices Configuration The items in this menu allow you to switch between PCIe Lanes and configure onboard devices. HD Audio This item allows you to enable or disable the High Definition Audio. Configuration options: [Disabled] [Enabled] Intel LAN Controller This item allows you to enable or disable the Intel LAN controller. Configuration options: [Disabled] [Enabled] LED lighting When system is in working state This item allows you to turn the RGB LED lighting on or off when the system is in the working state. Configuration options: [On] [Off] When system is in sleep, hibernate or soft off states This item allows you to turn the RGB LED lighting on or off when the system is in the sleep, hibernate or soft off states. Configuration options: [On] [Off] M.2_1 Configuration [Auto] Auto-detects the M.2 device mode. If a SATA device is detected, SATA6G_2 will be disabled. [SATA mode] Only supports M.2 SATA devices. Please note that SATA6G_2 port cannot be used in this mode. [PCIE mode] Only supports M.2 PCIE devices. PCIEX16_3 Bandwidth [X2] Run at X2 mode with SATA6G_56 enabled. [X4] Run at X4 mode for higher performance with SATA6G_56 disabled. Chapter 3 ASUS PRIME Z390-A 3-19