Asus PUNDIT-AE3 Pundit-AE3 User''s Manral for English Edition - Page 92
Serial Port1 Address [3F8/IRQ4], Serial Port2 Address [2F8/IRQ3], Serial Port2 Mode [Normal],
View all Asus PUNDIT-AE3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
The USB Devices Enabled items show the auto-detected values. If no USB device is detected, the item shows N o n e. OnBoard SiS USB 1.1 Device [Enabled] Allows you to enable or disable the onboard SiS USB 1.1 device. Configuration options: [Disabled] [Enabled] OnBoard SiS USB 2.0 Device [Enabled] Allows you to enable or disable the onboard SiS USB 2.0 device. Configuration options: [Disabled] [Enabled] Legacy USB Support [Auto] Allows you to enable or disable support for legacy USB devices. Setting to Auto allows the system to detect the presence of USB devices at startup. If detected, the USB controller legacy mode is enabled. If no USB device is detected, the legacy USB support is disabled. Configuration options: [Disabled] [Enabled] [Auto] USB 2.0 Controller Mode [HiSpeed] Allows you to configure the USB 2.0 controller in HiSpeed (480 Mbps) or Full Speed (12 Mbps). Configuration options: [HiSpeed ] [Full Speed] Stop EHCI HC in OHCI handover [Enabled] Allows you to enable or disable the feature to stop the EHCI host controller during the OHCI OS handover call. This is needed when installing operating systems that do not support EHCI host controllers. Configuration options: [Disabled] [Enabled] Serial Port1 Address [3F8/IRQ4] Allows you to select the Serial Port1 base address. Configuration options: [Disabled] [3F8/IRQ4] [3E8/IRQ4] [2E8/IRQ3] Serial Port2 Address [2F8/IRQ3] Allows you to select the Serial Port2 base address. Configuration options: [Disabled] [2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3] Serial Port2 Mode [Normal] Sets the Serial Port 2 mode. Configuration options: [Normal] [IrDA] [Ask IR] Parallel Port Address [378] Allows you to select the Parallel Port base address. Configuration options: [Disabled] [378] [278] [3BC] 5-18 Chapter 5: BIOS setup