Asus Pro Q570M-C/CSM Pro Q570M-C Users Manual English - Page 12

Layout contents, CPU socket, DDR4 DIMM slots, Expansion slots, Fan headers, Power connectors

Get Asus Pro Q570M-C/CSM PDF manuals and user guides View all Asus Pro Q570M-C/CSM manuals
Add to My Manuals
Save this manual to your list of manuals

Page 12 highlights

1.2.1 Layout contents 1. CPU socket The motherboard comes with an Intel® Socket LGA1200 for 11th Gen Intel® Core™ Processors & 10th Gen Intel® Core™, Pentium® Gold and Celeron® Processors. For more details, refer to Central Processing Unit (CPU). 2. DDR4 DIMM slots The motherboard comes with Dual Inline Memory Modules (DIMM) slots designed for DDR4 (Double Data Rate 4) memory modules. For more details, refer to System memory. 3. Expansion slots This motherboard supports one PCIe 4.0 x16 graphics card and two PCIe 3.0 x1 network cards, SCSI cards and other cards that comply with the PCI Express specification. 4. Fan headers The Fan headers allow you to connect fans to cool the system. FAN PWM FAN IN FAN PWR GND FAN PWM FAN IN FAN PWR GND 5. Power connectors These Power connectors allow you to connect your motherboard to a power supply. The power supply plugs are designed to fit in only one orientation. Find the proper orientation and push down firmly until the power supply plugs are fully inserted. Ensure to connect the 8-pin power plug. • For a fully configured system, we recommend that you use a power supply unit (PSU) that complies with ATX 12V Specification 2.0 (or later version) and provides a minimum power of 350W. • We recommend that you use a PSU with a higher power output when configuring a system with more power-consuming devices. The system may become unstable or may not boot up if the power is inadequate. • If you are uncertain about the minimum power supply requirement for your system, we recommend you to refer to online resources for Power Supply Wattage Calculator. 6. M.2 slots (Key M) The M.2 slots allow you to install M.2 devices such as M.2 SSD modules. • M.2_1 slot (Key M), type 2242/2260/2280 - Only Intel® 11th Gen processors support PCIe 4.0 x4 mode, this slot will be disabled for other CPUs. • M.2_2 slot (Key M), type 2242/2260/2280 supports PCIe 3.0 x4 & SATA modes. • M.2_2 slot shares bandwidth with SATA6G_2. When a device in SATA mode is installed on the M.2_2 slot, SATA6G_2 port cannot be used. 1-2 Chapter 1: Product Introduction

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
1-2
1.2.1
Layout contents
1. CPU socket
The motherboard comes with an Intel
®
Socket LGA1200 for 11
th
Gen Intel
®
Core™
Processors & 10
th
Gen Intel
®
Core™, Pentium
®
Gold and Celeron
®
Processors.
For more details, refer to
Central Processing Unit (CPU)
.
2. DDR4 DIMM slots
The motherboard comes with Dual Inline Memory Modules (DIMM) slots designed for DDR4
(Double Data Rate 4) memory modules.
For more details, refer to
System memory
.
3. Expansion slots
This motherboard supports one PCIe 4.0 x16 graphics card and two PCIe 3.0 x1 network
cards, SCSI cards and other cards that comply with the PCI Express specification.
4. Fan headers
The Fan headers allow you to connect fans to cool the system.
5. Power connectors
These Power connectors allow you to connect your motherboard to a power supply. The
power supply plugs are designed to fit in only one orientation. Find the proper orientation and
push down firmly until the power supply plugs are fully inserted.
Ensure to connect the 8-pin power plug.
•
For a fully configured system, we recommend that you use a power supply unit
(PSU) that complies with ATX 12V Specification 2.0 (or later version) and provides a
minimum power of 350W.
•
We recommend that you use a PSU with a higher power output when configuring a
system with more power-consuming devices. The system may become unstable or
may not boot up if the power is inadequate.
•
If you are uncertain about the minimum power supply requirement for your system, we
recommend you to refer to online resources for Power Supply Wattage Calculator.
6.
M.2 slots (Key M)
The M.2 slots allow you to install M.2 devices such as M.2 SSD modules.
•
M.2_1 slot (Key M), type 2242/2260/2280
- Only Intel
®
11
th
Gen processors support PCIe 4.0 x4 mode, this slot will be disabled
for other CPUs.
•
M.2_2 slot (Key M), type 2242/2260/2280 supports PCIe 3.0 x4 & SATA modes.
•
M.2_2 slot shares bandwidth with SATA6G_2. When a device in SATA mode is
installed on the M.2_2 slot, SATA6G_2 port cannot be used.
FAN PWM
FAN IN
FAN PWR
GND
FAN PWM
FAN IN
FAN PWR
GND
Chapter 1: Product Introduction