Asus Pro WS X299 SAGE II Users Manual English - Page 96

Intel® Virtual Raid on CPU in UEFI BIOS, CSM Compatibility Support Module, Launch CSM

Get Asus Pro WS X299 SAGE II PDF manuals and user guides View all Asus Pro WS X299 SAGE II manuals
Add to My Manuals
Save this manual to your list of manuals

Page 96 highlights

4.1.4 Intel® Virtual Raid on CPU in UEFI BIOS This feature requires a KEY module to enable CPU RAID functions with Intel® CPU RSTe. • The KEY module is purchased separately. • Due to CPU behavior, CPU RAID functions with Intel® CPU RSTe only supports Intel® Core™ X-series Processors (6-core or above) and Intel® SSD modules. • Refer to section Internal connectors for the location of the VROC_HW_KEY connector. • Due to hardware design, CPU RAID configuration as OS drives is only supported in the following configuration sets and cannot be created across different sets: [Set 1] U.2_1, U.2_2, and U.2_3. [Set 2] PCIEX16_1 to PCIEX16_3 with Intel® SSD installed. [Set 3] PCIEX16_4 to PCIEX16_7 with Intel® SSD installed. • Due to hardware design, RAID Volume between M.2_1 and M.2_2 is not supported. To enter the Intel® Virtual Raid on CPU in UEFI BIOS: 1. Enter the BIOS Setup during POST. 2. Go to the Boot menu > CSM (Compatibility Support Module) > Launch CSM, then set the item to [Disabled]. 3. Go to the Advanced menu > CPU Storage Configuration, then set the PCIe slot(s) that you have installed the storage devices to [Enabled]. Chapter 4 4-6 Chapter 4: RAID Support

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
4-6
Chapter 4: RAID Support
Chapter 4
4.1.4
Intel
®
Virtual Raid on CPU in UEFI BIOS
This feature requires a KEY module to enable CPU RAID functions with Intel
®
CPU RSTe.
•
The KEY module is purchased separately.
•
Due to CPU behavior, CPU RAID functions with Intel
®
CPU RSTe only supports Intel
®
Core™ X-series Processors (6-core or above) and Intel
®
SSD modules.
•
Refer to section
Internal connectors
for the location of the VROC_HW_KEY
connector.
•
Due to hardware design, CPU RAID configuration as OS drives is only supported in
the following configuration sets and cannot be created across different sets:
[Set 1]
U.2_1, U.2_2, and U.2_3.
[Set 2]
PCIEX16_1 to PCIEX16_3 with Intel
®
SSD installed.
[Set 3]
PCIEX16_4 to PCIEX16_7 with Intel
®
SSD installed.
•
Due to hardware design, RAID Volume between M.2_1 and M.2_2 is not supported.
To enter the Intel
®
Virtual Raid on CPU in UEFI BIOS:
1.
Enter the BIOS Setup during POST.
2.
Go to the
Boot
menu >
CSM (Compatibility Support Module)
>
Launch CSM
, then
set the item to
[Disabled]
.
3.
Go to the
Advanced
menu
>
CPU Storage Configuration
, then set the PCIe slot(s)
that you have installed the storage devices to
[Enabled]
.