Asus ProArt Display PA248QV PA248QV Series User Guide - Page 16
Connecting the cables, Upstream: Use the supplied USB Type-B to Type-A cable. Make sure
![]() |
View all Asus ProArt Display PA248QV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
90° 90° It is normal that the monitor slightly shakes while you adjust the viewing angle. 2.4 Connecting the cables Connect the cables as the following instructions: • To connect the power cord: Connect one end of the power cord securely to the monitor's AC input port, the other end to a power outlet. • To connect the VGA/DisplayPort/HDMI cable: a. Plug one end of the VGA/DisplayPort/HDMI cable to the monitor's VGA/ DisplayPort/HDMI jack. b. Connect the other end of the VGA/DisplayPort/HDMI cable to your computer's VGA /DisplayPort/HDMI jack. c. Tighten the two screws to secure the VGA connector. • To connect the audio cable: connect one end of the audio cable to the monitor's Audio-in port, the other end to the computer's audio-out port. • To use the earphone: connect the end with plug type to the monitor's earphone jack when an HDMI/DisplayPort signal is fed. • To use the USB 3.0 ports: »» Upstream: Use the supplied USB Type-B to Type-A cable. Make sure your computer is installed with the latest Windows 7/Windows 8.1/ Windows 10 operating system. That will enable the USB ports on the monitor to work. ASUS PA248QV Series LCD Monitor 2-3
![](/manual_guide/products/asus-proart-display-pa248qv-pa248qv-series-user-guide-0395149/16.png)