Asus Q370I-IM-A R3.0 Q370I-IM-A R30 User Manual English - Page 41
PCH Storage Configuration
View all Asus Q370I-IM-A R3.0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
VT-d [Disabled] Allows you to enable or disable VT-d function on MCH. Configuration options: [Enabled] [Disabled] 3.3.7 PCH Storage Configuration While entering Setup, the BIOS automatically detects the presence of SATA devices. The SATA Port items show Empty if no SATA device is installed to the corresponding SATA port. SATA Controller(s) Enables or disables onboard the SATA device. Configuration options: [Disabled] [Enabled] The following items appear only when you set SATA Controller(s) to [Enabled]. Smart Self Test This item allows you to enable or disable the SMART Self Test on all HDDs during POST. Configuration options: [Disabled] [Enabled] SATA Mode Selection This item allows you to set the SATA configuration. [AHCI] Set to [AHCI] when you want the SATA hard disk drives to use the AHCI (Advanced Host Controller Interface). The AHCI allows the onboard storage driver to enable advanced Serial ATA features that increases storage performance on random workloads by allowing the drive to internally optimize the order of commands. [Intel RST Premium With Set to [Intel RST Premium With Intel Optane System Intel Optane System Acceleration] when you want to create a RAID configuration Acceleration] from the SATA hard disk drives. Aggressive LPM Support This item is designed for LPM (link power management) support with a better energy saving conditions. When disabled, the hot plug function of SATA ports are disabled. Configuration options: [Disabled] [Enabled] Hot Plug These items allow you to enable/disable SATA Hot Plug Support. Configuration options: [Disabled] [Enabled] Chapter 3: BIOS setup 3-7