Asus Q470A-EM-A User Manual English - Page 48

Allows you to select a COM port to display redirection of Legacy OS and Legacy OPROM Messages. Configuration options: [COM1] [COM2] [COM3] [COM4] [COM5] [COM6] [COM7(Pci Bus0,Dev0,Func0) (Disabled)] Resolution This allows you to set the number of rows and columns supported on the Legacy OS. Configuration options: [80x24] [80x25] Redirect After POST Configuration options: [Always Enable] [BootLoader] [Always Enable] Legacy Console Redirection is enabled for Legacy OS. [BootLoader] Legacy Console Redirection is disabled before booting to Legacy OS. 3.3.9 SATA And RST Configuration This item allows you to configure SATA device options settings. SATA Controller(s) Allows you to enables or disables the onboard SATA device. Configuration options: [Disabled] [Enabled] The following item appears only when you set SATA Controller(s) to [Enabled]. SATA Mode Selection Allows you to determine how SATA controller(s) operate. Configuration options: [AHCI] [Intel RST Premium With Intel Optane System Acceleration] [AHCI] Set to [AHCI] when you want the SATA hard disk drives to use the AHCI (Advanced Host Controller Interface). The AHCI allows the onboard storage driver to enable advanced Serial ATA features that increases storage performance on random workloads by allowing the drive to internally optimize the order of commands. [Intel RST Premium Set to [Intel RST Premium With Intel Optane System With Intel Optane Acceleration] when you want to create a RAID configuration System Acceleration] from the SATA hard disk drives. The following items appear only when you set SATA Mode Selection to [Intel RST Premium With Intel Optane System Acceleration]. Sata Interrupt Selection Allows you to select which interrupt will be available to the operating system. This option only takes effect if SATA controller is in RAID mode. Configuration options: [Msix] [Msi] [Legacy] Q470A-EM-A 3-12