Asus ROG MAXIMUS X APEX Users Manual English - Page 60

Chapter 2 • USB 3.1 Gen 1 devices can only be used as data storage only. • We strongly recommend that you connect USB 3.1 Gen 1 devices to USB 3.1 Gen 1 ports for faster and better performance for your USB 3.1 Gen 1 devices. • Due to the design of the Intel chipset, all USB devices connected to the USB 2.0 and USB 3.1 Gen 1 ports are controlled by the xHCI controller. Some legacy USB devices must update their firmware for better compatibility. * LAN port LED indications Activity Link LED Speed LED Status Description Status Description Off No link Off 10 Mbps connection Orange Linked Orange 100 Mbps connection Orange (Blinking) Data activity Green 1 Gbps connection Orange (Blinking Ready to wake up then steady) from S5 mode ACT/LINK LED SPEED LED You can disable the LAN controllers in BIOS. Due to hardware design, the LAN1 port's LEDs may continue to blink even when disabled. * Aquantia AQC-108 5G LAN port LED indications Activity Link LED Status Description OFF No Link Blinking Link Speed LED Status Description OFF 10 Mbps connection GREEN ORANGE 5 Gbps connection 2.5 Gbps / 1 Gbps / 100Mbps connection ACT/LINK SPEED LED LED ** Audio 2, 4, 6 or 8-channel configuration Port Light Blue Lime Pink Orange Headset 2-channel Line In Line Out Mic In - Black - 4-channel 6-channel 8-channel Line In Front Speaker Out Mic In - Rear Speaker Out Line In Front Speaker Out Mic In Center/Sub woofer Rear Speaker Out Side Speaker Out Front Speaker Out Mic In Center/Sub woofer Rear Speaker Out 2-14 Chapter 2: Basic Installation