Asus ROG MAXIMUS X HERO User Guide

Asus ROG MAXIMUS X HERO Manual

Get Asus ROG MAXIMUS X HERO PDF manuals and user guides View all Asus ROG MAXIMUS X HERO manuals
Add to My Manuals
Save this manual to your list of manuals

Asus ROG MAXIMUS X HERO manual content summary:

  • Asus ROG MAXIMUS X HERO | User Guide - Page 1
    Motherboard ROG MAXIMUS X HERO
  • Asus ROG MAXIMUS X HERO | User Guide - Page 2
    service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing. ASUS PROVIDES THIS MANUAL https://www.asus.com/support/ or (2) problems
  • Asus ROG MAXIMUS X HERO | User Guide - Page 3
    ...vi About this guide...vii MAXIMUS X HERO specifications summary ix Package contents...xv Installation tools and components xvi Chapter 1: Product Introduction 1.1 Motherboard overview 1-1 1.1.1 Before you proceed 1-1 1.1.2 Motherboard layout 1-2 1.1.3 Central Processing Unit (CPU
  • Asus ROG MAXIMUS X HERO | User Guide - Page 4
    ASUS EZ Flash 3 Utility 3-23 3.9.2 Secure Erase 3-24 3.9.3 ASUS Overclocking Profile 3-25 3.9.4 ASUS SPD Information 3-25 3.9.5 Graphics Card Information 3-25 3.10 Exit menu 3-26 3.11 Updating BIOS 3-27 3.11.1 EZ Update 3-27 3.11.2 ASUS EZ Flash 3 3-28 3.11.3 ASUS CrashFree BIOS
  • Asus ROG MAXIMUS X HERO | User Guide - Page 5
    RAID Support 4.1 RAID configurations 4-1 4.1.1 RAID definitions 4-1 4.1.2 Installing storage devices 4-2 4.1.3 Intel® Rapid Storage Technology in UEFI BIOS 4-2 4.1.4 Intel® Rapid Storage Technology Option ROM utility 4-6 4.2 Creating a RAID driver disk 4-10 4.2.1 Creating a RAID driver
  • Asus ROG MAXIMUS X HERO | User Guide - Page 6
    Contact a qualified service technician or your retailer. Operation safety • Before installing the motherboard and adding devices on it, carefully read all the manuals that came with . • If you encounter technical problems with the product, contact a qualified service technician or your retailer. vi
  • Asus ROG MAXIMUS X HERO | User Guide - Page 7
    of the BIOS parameters are also provided. • Chapter 4: RAID Support This chapter describes the RAID configurations. Where to find more information Refer to the following sources for additional information and for product and software updates. 1. ASUS website The ASUS website (www.asus.com) provides
  • Asus ROG MAXIMUS X HERO | User Guide - Page 8
    of the following symbols used throughout this manual. DANGER/WARNING: Information to prevent injury to yourself when trying to complete a task. CAUTION: Information to prevent damage to the components when trying to complete a task. IMPORTANT: Instructions that you MUST follow to complete a task
  • Asus ROG MAXIMUS X HERO | User Guide - Page 9
    MAXIMUS X HERO specifications summary CPU Chipset Memory Expansion slots Graphic Multi-GPU support LAN Intel® Socket 1151 for 8th Gen Intel® Core™ Processors Supports 14nm CPU Supports Intel® Turbo Boost Technology 2.0* * Intel® Turbo Boost Technology 2.0 support depends on the CPU type. Intel®
  • Asus ROG MAXIMUS X HERO | User Guide - Page 10
    MAXIMUS X HERO specifications summary Storage Audio USB Intel® Z370 Chipset with RAID 0, 1, 5, 10, and Intel Rapid Storage Technology support - 1 x M .2_1 Socket 3 with M Key, type 2242/2260/2280 (supports the CPU installed. ROG SupremeFX S1220 8-Channel High Definition Audio CODEC - Supports up
  • Asus ROG MAXIMUS X HERO | User Guide - Page 11
    MAXIMUS X HERO specifications summary ROG ROG CloneDrive ROG CPU-Z Overwolf ROG Aura - Aura Lighting Control - Aura RGB Strip Headers - Aura Addressable RGB Header KeyBot II - One-click overclocking - DirectKey - Clr CMOS - Power On UEFI BIOS features: - Extreme Tweaker - Tweakers' Paradise - ROG
  • Asus ROG MAXIMUS X HERO | User Guide - Page 12
    MAXIMUS X HERO specifications summary Special Features Back I/O Ports ASUS Dual Intelligent Processors 5 - 5-Way Optimization tuning key perfectly consolidates TPU, DIGI+ Power Control, Fan Xpert 4, and Turbo App ASUS Exclusive Features - AI Suite 3 - Disk Unlocker ASUS EZ DIY - ASUS CrashFree
  • Asus ROG MAXIMUS X HERO | User Guide - Page 13
    MAXIMUS X HERO specifications summary Internal I/O Ports BIOS Manageability 2 x AURA RGB headers 1 x AURA Addressable RGB header 1 x USB 3.1 Gen 2 front panel connector 1 x USB 3.1 Gen 1 header supports additional 2 USB 3.1 Gen 1 ports 2 x USB 2.0 headers support additional 4 USB 2.0 ports 6 x
  • Asus ROG MAXIMUS X HERO | User Guide - Page 14
    MAXIMUS X HERO specifications summary Software Operating System Support Form Factor Drivers AURA ROG GameFirst IV ROG RAMDisk ROG RAMCache II ROG CPU-Z ROG Mem TweakIt Overwolf ROG Keybot II CloneDrive Kaspersky® Anti-Virus DAEMON Tools Software Winzip ASUS Utilities Sonic Studio III Sonic Radar
  • Asus ROG MAXIMUS X HERO | User Guide - Page 15
    DVD Documentation 1 x ROG MAXIMUS X HERO motherboard 1 x RGB LED extension cable 1 x RGB Addressable LED extension cable 2 x 2-in-1 SATA 6Gb/s cables 1 x SLI™ HB Bridge(2-way-M) 1 x Q-Connector 1 x ROG Coaster 1 x 3D printing mount kit 1 x 10-in-1 ROG cable label 1 x CPU Installation Tool 1 x 2-in
  • Asus ROG MAXIMUS X HERO | User Guide - Page 16
    Installation tools and components 1 Bag of screws Phillips (cross) screwdriver PC chassis Power supply unit Intel® LGA 1151 CPU Intel® LGA 1151 compatible CPU Fan DDR4 DIMM SATA hard disk drive SATA optical disc drive (optional) Graphics card (optional) The tools and components in the
  • Asus ROG MAXIMUS X HERO | User Guide - Page 17
    Before you proceed Take note of the following precautions before you install motherboard components or change any motherboard settings. • Unplug the power cord from the wall socket before to do so may cause severe damage to the motherboard, peripherals, or components. ROG MAXIMUS X HERO 1-1
  • Asus ROG MAXIMUS X HERO | User Guide - Page 18
    1.1.2 Motherboard layout Chapter 1 Refer to 1.1.9 Internal connectors and 2.3.1 Rear I/O connection for more information about rear panel connectors and internal connectors. 1-2 Chapter 1: Product Introduction
  • Asus ROG MAXIMUS X HERO | User Guide - Page 19
    24-pin EATXPWR; 8-pin EATX12V) 2. LGA1151 CPU Socket 3. CPU, CPU optional, high amp, extension, and 3D Mount 9. USB 3.1 Gen 2 front panel connector (U31G2_E3) 10. M.2 sockets (M.2_1; M.2_2) 11. Intel® Z370 Serial ATA 6 Gb/s connectors 1-11 1-11 1-9 1-9 1-24 1-18 1-22 ROG MAXIMUS X HERO 1-3
  • Asus ROG MAXIMUS X HERO | User Guide - Page 20
    (CPU) This motherboard supports the New 8th Gen Intel® Core™ processors on the LGA1151 package, with memory and PCI Express controllers integrated to support dual-channel (4 DIMM) DDR4 memory and 16 PCI Express 3.0/2.0 lanes. Chapter 1 Ensure that you install the correct CPU designed for LGA1151
  • Asus ROG MAXIMUS X HERO | User Guide - Page 21
    The motherboard comes with four Double Data Rate 4 (DDR4) Dual Inline Memory Modules (DIMM) slots. A DDR4 module is notched differently from a DDR, DDR2, or DDR3 module. DO NOT install a DDR, DDR2, or DDR3 memory module to the DDR4 slot. Recommended memory configurations ROG MAXIMUS X HERO 1-5
  • Asus ROG MAXIMUS X HERO | User Guide - Page 22
    for overclocking may operate at a lower frequency than the vendor-marked value. • For system stability, use a more efficient memory cooling system to support a full memory load (4 DIMMs) or overclocking condition. • Always install the DIMMS with the same CAS Latency. For an optimum compatibility, we
  • Asus ROG MAXIMUS X HERO | User Guide - Page 23
    cord before adding or removing expansion cards. Failure to do so may cause you physical injury and damage motherboard components. Chapter 1 Slot No. Slot Description 1 PCIe x1_1 slot 2 PCIe x16/x8_1 slot 3 PCIe x1_2 slot 4 PCIe x8_2 slot 5 PCIe x1_3 slot 6 PCIe x4_3 slot ROG MAXIMUS X HERO 1-7
  • Asus ROG MAXIMUS X HERO | User Guide - Page 24
    x1 Disabled x2 x4 • We recommend that you provide sufficient power when running CrossFireX™ or SLI™ mode. • Connect chassis fans to the motherboard chassis fan connectors when using multiple graphics cards for better thermal environment. PCIe_x16/x8_1 slot switches to x8 mode when PCIe_x8_2 slot
  • Asus ROG MAXIMUS X HERO | User Guide - Page 25
    who continually change settings to enhance system performance. 1. Power-on button (START) The motherboard comes with a power-on button that allows you to power up or wake up any motherboard component. 2. RESET button (RESET) Press the reset button to reboot the system. ROG MAXIMUS X HERO 1-9
  • Asus ROG MAXIMUS X HERO | User Guide - Page 26
    DIMMs that are not compatible with the motherboard may cause system boot failure, and BIOS default settings. A message will appear during POST reminding you that the BIOS has been restored to its default settings. • We recommend that you download and update to the latest BIOS version from www.asus
  • Asus ROG MAXIMUS X HERO | User Guide - Page 27
    be pressed anytime to force the system to reboot into the BIOS safe mode. This button temporarily applies safe settings to the BIOS while retaining any overclocked settings allowing you to modify the settings to be retried in quick succession to achieve a successful POST. ROG MAXIMUS X HERO 1-11
  • Asus ROG MAXIMUS X HERO | User Guide - Page 28
    6. Slow Mode Switch (SLOW_MODE) Slow Mode Switch is employed during LN2 benching. The system may crash due to the CPU being unstable when using extreme overclocking, enabling slow mode will decrease the processor frequency and stabilize the system, allowing overclockers to keep track of their
  • Asus ROG MAXIMUS X HERO | User Guide - Page 29
    during POST and help the system boot successfully. Chapter 1 2. 3D Mount Secure 3D printed parts to these 3D Mount holes for a personalized motherboard. • Download 3D source files at http://www.asus.com. • Use the bundled 3D Mount screws to install the 3D printed parts. ROG MAXIMUS X HERO 1-13
  • Asus ROG MAXIMUS X HERO | User Guide - Page 30
    Chapter 1 1.1.8 Onboard LEDs 1. Q LEDs (CPU, DRAM, VGA, BOOT) Q LEDs check key components (CPU, DRAM, VGA card, and booting devices) in sequence during motherboard booting process. If an error is found, the corresponding LED remains lit until the problem is solved. This user-friendly design
  • Asus ROG MAXIMUS X HERO | User Guide - Page 31
    table on the following page for details. • The Q-Code LED provides the most probable cause of an error code as a starting point for troubleshooting. The actual cause may vary from case to case. • Please refer to the Q-Code table in the Appendix section for more details. ROG MAXIMUS X HERO 1-15
  • Asus ROG MAXIMUS X HERO | User Guide - Page 32
    10 configuration with the Intel® Rapid Storage Technology through the onboard Intel® Z370 chipset. • These BIOS to [Intel RST Premium With Intel Optane System Acceleration (RAID)]. • Before creating a RAID set, refer to section RAID configurations or the manual bundled in the motherboard support
  • Asus ROG MAXIMUS X HERO | User Guide - Page 33
    charging time for USB-chargeable devices, optimized power efficiency, and backward compatibility with USB 2.0. The USB 3.1 Gen 1 module is purchased separately. The plugged USB 3.1 gen 1 device may run on xHCI or EHCI mode depending on the operating system's setting. ROG MAXIMUS X HERO 1-17
  • Asus ROG MAXIMUS X HERO | User Guide - Page 34
    1 Never connect a 1394 cable to the USB connectors. Doing so will damage the motherboard! 5. Front panel audio connector (10-1 pin AAFP) This connector is for a chassis-mounted front panel audio I/O module that supports HD Audio standard. Connect one end of the front panel audio I/O module cable to
  • Asus ROG MAXIMUS X HERO | User Guide - Page 35
    the all-in-one cooler (AIO cooler) to the AIO_PUMP header, and connect the fan cables to the CPU_FAN and/or CPU_OPT header(s). • W_PUMP+ function support depends on water cooling device. ROG MAXIMUS X HERO 1-19
  • Asus ROG MAXIMUS X HERO | User Guide - Page 36
    Chapter 1 Header CPU_FAN CPU_OPT CHA_FAN1 CHA_FAN2 CHA_FAN3 AIO_PUMP W_PUMP+ H_AMP Max. Current 1A 1A 1A 1A 1A 1A 3A 3A Max. Power 12W 12W 12W 12W 12W 12W 36W 36W Default Speed Q-Fan Controlled Q-Fan Controlled Q-Fan Controlled Q-Fan Controlled Q-Fan Controlled Full Speed Full Speed Q-Fan
  • Asus ROG MAXIMUS X HERO | User Guide - Page 37
    connectors supports BIOS settings. Pressing the power button for more than four seconds while the system is ON turns the system OFF. • Reset button (2-pin RESET) This 2-pin connector is for the chassis-mounted reset button for system reboot without turning off the system power. ROG MAXIMUS X HERO
  • Asus ROG MAXIMUS X HERO | User Guide - Page 38
    9. Thermal sensor connector (2-pin T_SENSOR) This connector is for the thermistor cable that allows you to monitor the temperature of your motherboard's critical components and connected devices. 10. LED connector (5-pin LED2_CON1) This connector is for connecting LED strips on your back I/O cover
  • Asus ROG MAXIMUS X HERO | User Guide - Page 39
    These connectors are for RGB LED strips. Chapter 1 The RGB header supports 5050 RGB multi-color LED strips (12V/G/R/B), with a maximum power rating the motherboard. • The LED strip will only light up when the system is operating. • The LED strip is purchased separately. ROG MAXIMUS X HERO 1-23
  • Asus ROG MAXIMUS X HERO | User Guide - Page 40
    strips or WS2812B based LED strips. Chapter 1 The addressable RGB header supports WS2812B addressable RGB LED strips (5V/Data/ Ground), with a the power supply. Failure to do so may cause severe damage to the motherboard, peripherals, or components. • Actual lighting and color will vary with LED
  • Asus ROG MAXIMUS X HERO | User Guide - Page 41
    / 2280 PCIe storage devices. • These sockets support IRST (Intel® Rapid Storage Technology). • These sockets are Intel® Optane™ Memory Ready. The M.2 SSD module can manually adjust the fans and water pump to optimize the thermal efficiency of your liquid cooling system. ROG MAXIMUS X HERO 1-25
  • Asus ROG MAXIMUS X HERO | User Guide - Page 42
    Chapter 1 15. TPM connector (14-1 pin TPM) This connector supports a Trusted Platform Module (TPM) system, which securely stores keys, digital certificates, passwords and data. A TPM system also helps enhance network security, protect digital identities, and
  • Asus ROG MAXIMUS X HERO | User Guide - Page 43
    but the installation steps are the same for all models. CPU installation Ensure that you install the correct CPU designed for LGA1151 socket only. DO NOT install a CPU designed for LGA1155 and LGA1156 sockets on the LGA1151 socket. Chapter 2 Top of CPU Bottom of CPU ROG MAXIMUS X HERO Bottom of
  • Asus ROG MAXIMUS X HERO | User Guide - Page 44
    Top of CPU Chapter 2 • The CPU Installation Tool is only compatible on ASUS motherboards with a Intel® LGA1151 socket. • Ensure that the CPU is firmly clicked into place before installing it onto the CPU socket on the motherboard. • Use the CPU Installation Tool for installing the CPU only. DO NOT
  • Asus ROG MAXIMUS X HERO | User Guide - Page 45
    2.1.2 Cooling system installation Apply the Thermal Interface Material to the CPU cooling system and CPU before you install the cooling system, if necessary. To install the CPU heatsink and fan assembly Chapter 2 ROG MAXIMUS X HERO 2-3
  • Asus ROG MAXIMUS X HERO | User Guide - Page 46
    To install an AIO cooler Chapter 2 AIO_PUMP CPU_FAN CPU_OPT 2-4 Chapter 2: Basic Installation
  • Asus ROG MAXIMUS X HERO | User Guide - Page 47
    chassis, ensuring that its rear I/O ports are aligned to the chassis' rear I/O panel. 2. Place nine (9) screws into the holes indicated by circles to secure the motherboard to the chassis. Chapter 2 DO NOT over tighten the screws! Doing so can damage the motherboard. ROG MAXIMUS X HERO 2-5
  • Asus ROG MAXIMUS X HERO | User Guide - Page 48
    2.1.4 DIMM installation Chapter 2 To remove a DIMM 2-6 Chapter 2: Basic Installation
  • Asus ROG MAXIMUS X HERO | User Guide - Page 49
    2.1.5 ATX power connection Chapter 2 Ensure to connect the 8-pin power plug. 2.1.6 SATA device connection OR ROG MAXIMUS X HERO 2-7
  • Asus ROG MAXIMUS X HERO | User Guide - Page 50
    Front I/O connector To install ASUS Q-Connector To install USB 3.1 Gen 2 connector USB 3.1 Gen 2 This connector will only fit in one orientation. Push the connector until it clicks into place. To install USB 3.1 Gen 1 connector To install USB 2.0 connector USB 3.1 Gen 1 USB 2.0 To install front
  • Asus ROG MAXIMUS X HERO | User Guide - Page 51
    2.1.8 Expansion card installation To install PCIe x16 cards To install PCIe x1 cards Chapter 2 ROG MAXIMUS X HERO 2-9
  • Asus ROG MAXIMUS X HERO | User Guide - Page 52
    2.1.9 M.2 installation Chapter 2 Supported M.2 type varies per motherboard. 2-10 Chapter 2: Basic Installation
  • Asus ROG MAXIMUS X HERO | User Guide - Page 53
    (1A, 12W), 40mm x 40mm fans or 50mm x 50mm fans. • Ensure to the use the bundled screws that came with your fans. • Fans are purchased separately. ROG MAXIMUS X HERO 2-11
  • Asus ROG MAXIMUS X HERO | User Guide - Page 54
    port. We recommend you to use a USB 2.0 storage device to save the latest BIOS version for better compatibility and stability. 2. Visit https://www.asus.com/support/ and download the latest BIOS version for this motherboard. 3. Rename the file as M10H.CAP, then copy it to your USB storage device
  • Asus ROG MAXIMUS X HERO | User Guide - Page 55
    to the USB 3.1 Gen 1 ports are controlled by the xHCI controller. Some legacy USB devices must update their firmware for better compatibility. • When KeyBot II is activated, USB hot plug function of the KeyBot port (USB 3.1 Gen 1 port 7) will be temporarily disabled. ROG MAXIMUS X HERO 2-13
  • Asus ROG MAXIMUS X HERO | User Guide - Page 56
    * LAN ports LED indications Activity Link LED Status Description OFF No link ORANGE Linked BLINKING Data activity Speed LED Status Description OFF 10 Mbps connection ORANGE 100 Mbps connection GREEN 1 Gbps connection ACT/LINK SPEED LED LED LAN port ** Audio 2, 4, 6 or 8-channel
  • Asus ROG MAXIMUS X HERO | User Guide - Page 57
    2.3.2 Audio I/O connections Audio I/O ports Connect to Headphone and Mic Connect to Stereo Speakers Chapter 2 Connect to 2 Speakers ROG MAXIMUS X HERO 2-15
  • Asus ROG MAXIMUS X HERO | User Guide - Page 58
    Chapter 2 Connect to 4 Speakers Connect to 6 Speakers Connect to 8 Speakers 2-16 Chapter 2: Basic Installation
  • Asus ROG MAXIMUS X HERO | User Guide - Page 59
    on, hold down the key to enter the BIOS Setup. Follow the instructions in Chapter 3. 2.5 Turning off the computer While the BIOS setting. Press the power button for more than four seconds to let the system enter the soft-off mode regardless of the BIOS setting. ROG MAXIMUS X HERO 2-
  • Asus ROG MAXIMUS X HERO | User Guide - Page 60
    Chapter 2 2-18 Chapter 2: Basic Installation
  • Asus ROG MAXIMUS X HERO | User Guide - Page 61
    BIOS settings may result to instability or boot failure. We strongly recommend that you change the BIOS settings only with the help of a trained service personnel. When downloading or updating the BIOS file, rename it as M10H.CAP for this motherboard. Chapter 3 ROG MAXIMUS X HERO 3-1
  • Asus ROG MAXIMUS X HERO | User Guide - Page 62
    the motherboard to the default value. See section 2.3.1 Rear I/O connection for the location of the Clear CMOS button to clear RTC RAM. • The BIOS setup program does not support the Bluetooth devices. Please visit ASUS website for the detailed BIOS content manual. BIOS menu screen The BIOS Setup
  • Asus ROG MAXIMUS X HERO | User Guide - Page 63
    Refer to the following sections for the detailed configurations. The default screen for entering the BIOS setup program can be changed. Refer to the Setup Mode item in section Boot menu EZ Mode Search on the FAQ Displays the CPU temperature, CPU, and memory voltage output ROG MAXIMUS X HERO 3-3
  • Asus ROG MAXIMUS X HERO | User Guide - Page 64
    button to manually tweak the fans to your desired settings. Refer to section 3.2.3 Q-Fan Control for more information. EZ Tuning Wizard (F11) This button above the menu bar allows you to view and tweak the overclocking settings of your system. It also allows you to change the motherboard's SATA
  • Asus ROG MAXIMUS X HERO | User Guide - Page 65
    a QR code, scan this QR code on your mobile device to connect to the BIOS FAQ web page of the ASUS support website. You can also scan the following QR code: Hot keys This button above the This button shows the items that you last modified and saved in BIOS Setup. Chapter 3 ROG MAXIMUS X HERO 3-5
  • Asus ROG MAXIMUS X HERO | User Guide - Page 66
    display language Creates storage RAID and of the BIOS setup program configures system overclocking Chapter 3 Enables or disables the SATA RAID mode for Intel Rapid Storage Technology Displays the CPU Fan's speed. Click the button to manually tune the fans Loads optimized default settings Saves
  • Asus ROG MAXIMUS X HERO | User Guide - Page 67
    QFan Control The QFan Control allows you to set a fan profile or manually configure the operating speed of your CPU and chassis fans. Click to select a fan to be configured Click to changes Click to go back to main menu Select to manually configure your fans Chapter 3 ROG MAXIMUS X HERO 3-7
  • Asus ROG MAXIMUS X HERO | User Guide - Page 68
    configure your fans' operating speed. Chapter 3 Speed points To configure your fans: Select to manually configure your fans 1. Select the fan that you want to configure and to view its current status. 2. Click and drag the speed points to adjust
  • Asus ROG MAXIMUS X HERO | User Guide - Page 69
    Wizard allows you to easily overclock your CPU and DRAM, computer usage, and CPU fan to their best settings. You can . from the BIOS screen to open 2. Click OC then click Next. 3. Select a PC scenario Daily Computing or Gaming/Media Editing, then click Next. Chapter 3 ROG MAXIMUS X HERO 3-9
  • Asus ROG MAXIMUS X HERO | User Guide - Page 70
    > on your keyboard or click EZ Tuning Wizard screen. 2. Click RAID then click Next. from the BIOS screen to open • Ensure that your HDDs have no existing RAID volumes. • Ensure to connect your HDDs to Intel® SATA connectors. 3. Select the port that you want to set to [RAID] mode, PCIE or SATA
  • Asus ROG MAXIMUS X HERO | User Guide - Page 71
    Yes to continue the RAID setup. 6. After the RAID setup is done, click Yes to exit the setup then click OK to reset your system. ROG MAXIMUS X HERO 3-11
  • Asus ROG MAXIMUS X HERO | User Guide - Page 72
    3.3 My Favorites My Favorites is your personal space where you can easily save and access your favorite BIOS items. Chapter 3 My Favorites comes with several performance, power saving, and fast boot related items by default. You can personalize this screen by adding or
  • Asus ROG MAXIMUS X HERO | User Guide - Page 73
    • User-managed items such as language and boot order • Configuration items such as Memory SPD Information, system time and date. 4. Click Exit (ESC) or press key to close Setup Tree Map screen. 5. Go to My Favorites menu to view the saved BIOS items. Chapter 3 ROG MAXIMUS X HERO 3-13
  • Asus ROG MAXIMUS X HERO | User Guide - Page 74
    depending on the CPU and DIMM model you installed on the motherboard. Chapter 3 Ai Overclock Tuner Allows you to select the CPU overclocking options to achieve the desired CPU internal frequency. Configuration options: [Auto] Loads the optimal settings for the system. [Manual] Allows you to
  • Asus ROG MAXIMUS X HERO | User Guide - Page 75
    ASUS core ratio settings. [Disabled] This item allows you to set to default core ratio settings. CPU Core Ratio This item allows you to set the CPU Internal CPU Power Management The subitems in this menu allow you to set the CPU ratio and features. Intel(R) Chapter 3 ROG MAXIMUS X HERO 3-15
  • Asus ROG MAXIMUS X HERO | User Guide - Page 76
    CPU Configuration The items in this menu show the CPU-related information that the BIOS CPU's power. Intel(R) SpeedStep(tm) This item allows more than two frequency to be supported. Configuration options: [Auto] [Enabled] [Disabled] Turbo Mode This item allows you to automatically set the CPU
  • Asus ROG MAXIMUS X HERO | User Guide - Page 77
    Setup, the BIOS automatically detects storage driver to Intel RST Premium With Intel Optane System Acceleration (RAID)] Set to [Intel RST Premium With Intel Optane System Acceleration (RAID)] when you want to create a RAID configuration from the SATA hard disk drives. Chapter 3 ROG MAXIMUS X HERO
  • Asus ROG MAXIMUS X HERO | User Guide - Page 78
    you to enable or disable SATA Hot Plug Support. Configuration options: [Disabled] [Enabled] 3.6.6 PCH-FW Configuration This item allows you to configure the firmware TPM. 3.6.7 ROG Effects The items in this menu allow you to configure the LEDs on your motherboard and the functions for the Q-Code LED
  • Asus ROG MAXIMUS X HERO | User Guide - Page 79
    mode] Only supports M.2 SATA devices. Please note that SATA6G_1 port cannot be used in this mode. [PCIE mode] Only supports M.2 PCIE Intel LAN Controller This item allows you to enable or disable the Intel LAN controllers. Configuration options: [Disabled] [Enabled] Chapter 3 ROG MAXIMUS X HERO
  • Asus ROG MAXIMUS X HERO | User Guide - Page 80
    menu allow you to configure Ipv4 / Ipv6 PXE support. 3.6.11 HDD/SSD SMART Information This menu displays the the connected devices. NVM Express devices do not support SMART information. 3.6.12 USB Configuration The items Motherboard layout for the location of the USB ports. Chapter 3 3-20
  • Asus ROG MAXIMUS X HERO | User Guide - Page 81
    AC power loss. [Fast Boot] Accelerates the boot speed on the next boot after an AC power loss. Setup Mode [Advanced Mode] This item allows you to go to Advanced Mode of the BIOS after POST. [EZ Mode] This item allows you to go to EZ Mode of the BIOS after POST. Chapter 3 ROG MAXIMUS X HERO
  • Asus ROG MAXIMUS X HERO | User Guide - Page 82
    Support Module) items to fully support support the non-UEFI driver add-on devices or the Windows® UEFI mode. Disable the CSM to fully support the non-UEFI driver Legacy only] [UEFI driver first] Boot from Storage [Legacy only] [UEFI driver first] Boot from PCI only] [UEFI driver first] Secure Boot
  • Asus ROG MAXIMUS X HERO | User Guide - Page 83
    item allows you to run ASUS EZ Flash 3. When you press , a confirmation message appears. Use the left/right arrow key to select between [Yes] or [No], then press to confirm your choice. For more details, refer to section 3.11.2 ASUS EZ Flash 3. Chapter 3 ROG MAXIMUS X HERO 3-23
  • Asus ROG MAXIMUS X HERO | User Guide - Page 84
    , click Tool > Secure Erase on the Advanced mode menu. Check the ASUS support site for a full list of SSDs tested with Secure Erase. The drive is only supported on Intel SATA port. For more information about Intel SATA ports, refer to section 1.1.2 Motherboard layout of this manual. Displays the
  • Asus ROG MAXIMUS X HERO | User Guide - Page 85
    recommended configuration for the PCIE slots that the graphics card is installed in your system. This feature is only supported on selected ASUS graphics cards. Bus Interface This item allows you to select the bus interface. Configuration options: [PCIEX16/X8_1] Chapter 3 ROG MAXIMUS X HERO 3-25
  • Asus ROG MAXIMUS X HERO | User Guide - Page 86
    menu The Exit menu items allow you to load the optimal default values for the BIOS items, and save or discard your changes to the BIOS items. You can access the EZ Mode from the Exit menu. Load Optimized .efi) from one of the available filesystem devices. Chapter 3 3-26 Chapter 3: BIOS Setup
  • Asus ROG MAXIMUS X HERO | User Guide - Page 87
    allows you to update the motherboard BIOS in Windows® environment. • EZ Update requires an Internet connection either through a network or an ISP (Internet Service Provider). • This utility is available in the support DVD that comes with the motherboard package. Chapter 3 ROG MAXIMUS X HERO 3-27
  • Asus ROG MAXIMUS X HERO | User Guide - Page 88
    varies per region and Internet conditions. Check your local Internet connection before updating through the Internet. To update the BIOS by USB: 1. Enter the Advanced Mode of the BIOS setup program. Go to the Tool menu to select ASUS EZ Flash Utility and press . 2. Insert the USB flash disk
  • Asus ROG MAXIMUS X HERO | User Guide - Page 89
    instructions to complete the update. 5. Reboot the system when the update process is done. Ensure to load the BIOS default settings to ensure system compatibility and stability. Select the Load Optimized Defaults item under the Exit menu. See section 3.10 Exit Menu for details. ROG MAXIMUS X HERO
  • Asus ROG MAXIMUS X HERO | User Guide - Page 90
    or gets corrupted during the updating process. You can restore a corrupted BIOS file using the motherboard support DVD or a USB flash drive that contains the BIOS file. The BIOS file in the motherboard support DVD may be older than the BIOS file published on the ASUS official website. If you want
  • Asus ROG MAXIMUS X HERO | User Guide - Page 91
    4: RAID Support RAID Support 4 4.1 RAID configurations The motherboard supports Intel® Rapid Storage Technology with RAID 0, RAID 1, RAID 5, and RAID 10 solution. If you want to install a Windows® operating system to a hard disk drive included in a RAID set, you have to create a RAID driver disk
  • Asus ROG MAXIMUS X HERO | User Guide - Page 92
    array. Refer to Chapter 2 for details on installing storage devices to your motherboard. 4.1.3 Intel® Rapid Storage Technology in UEFI BIOS To enter the Intel® Rapid Storage Technology in UEFI BIOS: 1. Enter the BIOS Setup during POST. 2. Go to the Advanced menu > PCH Storage Configuration, then
  • Asus ROG MAXIMUS X HERO | User Guide - Page 93
    Creating a RAID set To create a RAID set: 1. From the Intel® Rapid Storage Technology menu, select Create RAID Volume and press . The following screen appears: 2. When Disks, press and select X for the disks you want to include in the RAID set. Chapter 4 ROG MAXIMUS X HERO 4-3
  • Asus ROG MAXIMUS X HERO | User Guide - Page 94
    default value indicates the maximum allowed capacity. 7. When the Create Volume item is selected, press to create the RAID volume and return to the Intel® Rapid Storage Technology menu. Chapter 4 4-4 Chapter 4: RAID Support
  • Asus ROG MAXIMUS X HERO | User Guide - Page 95
    disk drives when you delete a RAID set. To delete a RAID set: 1. From the Intel® Rapid Storage Technology menu, select the RAID volume you want to delete and press . volume and return to the Intel® Rapid Storage Technology menu, or select No to cancel. Chapter 4 ROG MAXIMUS X HERO 4-5
  • Asus ROG MAXIMUS X HERO | User Guide - Page 96
    Rapid Storage Technology Option ROM utility To enter the Intel® Rapid Storage Technology Option ROM utility: 1. Turn on the system. 2. to move through the menus and select the menu options. The RAID BIOS setup screens shown in this section are for reference only and may not exactly match the
  • Asus ROG MAXIMUS X HERO | User Guide - Page 97
    Disk Non-RAID Disk Non-RAID Disk Non-RAID Disk Select 2 to 6 to use in creating the volume. [↑↓]-Prev/Next [SPACE]-SelectDisk [ENTER]-Done Chapter 4 ROG MAXIMUS X HERO 4-7
  • Asus ROG MAXIMUS X HERO | User Guide - Page 98
    volume? (Y/N) 9. Press to create the RAID volume and return to the main menu, or to go back to the CREATE VOLUME menu. Chapter 4 4-8 Chapter 4: RAID Support
  • Asus ROG MAXIMUS X HERO | User Guide - Page 99
    delete "Volume0"? (Y/N): 3. Press to delete the RAID set and return to the utility main menu, or press to return to the DELETE VOLUME menu. Chapter 4 ROG MAXIMUS X HERO 4-9
  • Asus ROG MAXIMUS X HERO | User Guide - Page 100
    the Intel® driver. 2. Insert the support USB drive with RAID driver into the USB port, and then click Browse. 3. Click the name of the device you've inserted, go to Drivers > RAID, and then select the RAID driver for the corresponding OS version. Click OK. 4. Follow the succeeding screen instructions
  • Asus ROG MAXIMUS X HERO | User Guide - Page 101
    not installed Invalid CPU type or Speed CPU mismatch CPU self test failed or possible CPU cache error CPU micro-code is not found or micro-code update is failed Internal CPU error Reset PPI is not available Reserved for future AMI error codes (continued on the next page) ROG MAXIMUS X HERO A-1
  • Asus ROG MAXIMUS X HERO | User Guide - Page 102
    Invalid recovery capsule Reserved for future AMI error codes DXE Core is started NVRAM initialization Installation of the PCH Runtime Services CPU DXE initialization is started PCI host bridge initialization System Agent DXE initialization is started System Agent DXE SMM initialization is started
  • Asus ROG MAXIMUS X HERO | User Guide - Page 103
    A9 AA AB AC AD AE AF B0 B1 B2 B3 Description Boot Device Selection (BDS) phase is started Driver connecting is Services event Runtime Set Virtual Address MAP Begin Runtime Set Virtual Address MAP End Legacy Option ROM Initialization System Reset (continued on the next page) ROG MAXIMUS X HERO
  • Asus ROG MAXIMUS X HERO | User Guide - Page 104
    (reset of NVRAM settings) Reserved for future AMI codes CPU initialization error System Agent initialization error PCH initialization error Some of returned error) Boot Option is failed (StartImage returned error) Flash update is failed Reset protocol is not available ACPI/ASL Checkpoints Code
  • Asus ROG MAXIMUS X HERO | User Guide - Page 105
    radiate radio frequency energy and, if not installed and used in accordance with manufacturer's instructions, may cause harmful interference to radio communications. However, there is no guarantee that for compliance could void the user's authority to operate this equipment. ROG MAXIMUS X HERO A-5
  • Asus ROG MAXIMUS X HERO | User Guide - Page 106
    Appendix Compliance Statement of Innovation, Science and Economic Development Canada (ISED) This device complies with Innovation, Science and Economic Development Canada licence exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference,
  • Asus ROG MAXIMUS X HERO | User Guide - Page 107
    in our products at ASUS REACH website at http://csr.asus.com/english/REACH.htm. DO NOT throw the motherboard in municipal waste. should not be placed in municipal waste. ASUS Recycling/Takeback Services ASUS recycling and takeback programs come from our commitment License. ROG MAXIMUS X HERO A-7
  • Asus ROG MAXIMUS X HERO | User Guide - Page 108
    con le direttive correlate. Il testo completo della dichiarazione di conformità UE è disponibile all'indirizzo: www.asus.com/support ASUS www.asus.com/support ASUSTeK Computer Inc www.asus.com/support Hrvatski ASUSTeK Computer Inc. ovim izjavljuje da je ovaj uređaj sukladan s bitnim zahtjevima
  • Asus ROG MAXIMUS X HERO | User Guide - Page 109
    Harkort Str. 21-23, 40880 Ratingen, Germany Fax +49-2102-959931 Web site http://www.asus.com/de Online contact http://eu-rma.asus.com/sales Technical Support Telephone +49-2102-5789555 Support Fax +49-2102-959911 Online support http://qr.asus.com/techserv ROG MAXIMUS X HERO A-9
  • Asus ROG MAXIMUS X HERO | User Guide - Page 110
    1077(a) Responsible Party Name: Asus Computer International Address: 800 Corporate Way, Fremont, CA 94539. Phone/Fax No: (510)739-3777/(510)608-4555 hereby declares that the product Product Name : Motherboard Model Number : ROG MAXIMUS X HERO, ROG MAXIMUS X HERO(WI-FI AC) Conforms to the following
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
Motherboard
ROG
MAXIMUS
X HERO