Asus ROG MAXIMUS Z690 HERO EVA Users Manual English - Page 47
M.2 installation, Loosen the screws from the M.2 heatsinks., Lift and remove the heatsinks.
View all Asus ROG MAXIMUS Z690 HERO EVA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
2.1.4 M.2 installation Supported M.2 type varies per motherboard. • The illustrations only show the installation steps for a single M.2 slot, the steps are the same for the other M.2 slots if you wish to install an M.2 to another M.2 slot. • Use a Phillips screwdriver when removing or installing the screws or screw stands mentioned in this section. • If the thermal pad on the M.2 heatsink becomes damaged and needs to replaced, we recommend replacing it with a thermal pad with a thickness of 1.25mm. • The M.2 is purchased separately. 1. Loosen the screws from the M.2 heatsinks. 2. Lift and remove the heatsinks. 1 1 2 1 1 2 Chapter 2 ROG MAXIMUS Z690 HERO EVA 2-7
ROG MAXIMUS Z690 HERO EVA
2-7
Chapter 2
2.1.4
M.2 installation
Supported M.2 type varies per motherboard.
•
The illustrations only show the installation steps for a single M.2 slot, the steps are
the same for the other M.2 slots if you wish to install an M.2 to another M.2 slot.
•
Use a Phillips screwdriver when removing or installing the screws or screw stands
mentioned in this section.
•
If the thermal pad on the M.2 heatsink becomes damaged and needs to replaced, we
recommend replacing it with a thermal pad with a thickness of 1.25mm.
•
The M.2 is purchased separately.
1.
Loosen the screws from the M.2 heatsinks.
2.
Lift and remove the heatsinks.
1
1
1
1
2
2