Asus ROG MAXIMUS Z790 DARK HERO Users Manual English - Page 21
Memory configurations
![]() |
View all Asus ROG MAXIMUS Z790 DARK HERO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Chapter 1 Memory configurations You may install Non-ECC DDR5 DIMMs into the DIMM sockets. • You may install varying memory sizes in the DIMM channels. The system maps the total size of the lower-sized channel for the dual-channel configuration. Any excess memory from the higher-sized channel is then mapped for single-channel operation. • The default memory operation frequency is dependent on its Serial Presence Detect (SPD), which is the standard way of accessing information from a memory module. Under the default state, some memory modules for overclocking may operate at a lower frequency than the vendor-marked value. • For system stability, use a more efficient memory cooling system to support a full memory load or overclocking condition. • Always install the DIMMS with the same CAS Latency. For an optimum compatibility, we recommend that you install memory modules of the same version or data code (D/C) from the same vendor. Check with the vendor to get the correct memory modules. • Visit the ASUS website for the latest QVL. Motherboard User Manual 1-5
![](/manual_guide/products/asus-rog-maximus-z790-dark-hero-users-manual-english-5b7618a/21.png)